archer ax50 capped at 1.2gbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

archer ax50 capped at 1.2gbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
archer ax50 capped at 1.2gbps
archer ax50 capped at 1.2gbps
2022-12-23 11:33:08 - last edited 2022-12-23 13:20:39
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.11 Build 20220526 rel.63519(4555)

hello, i have a problem with archer ax50 as the connection speed on wifi 6 is capped at 1.2gbps, i have intel ax200 which should give me 2.4gbps connection speed also as stated about the router specs it should give 2.4gbps on 5ghz channel, did anyone find a solution for that?

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:archer ax50 capped at 1.2gbps-Solution
2022-12-23 11:43:35 - last edited 2022-12-23 13:20:39

  @ibramaswadeh 

 

Hi,

 

You could try if the speed may improve if you set the "Channel Width" of the 5 GHz Wi-Fi from "Auto" to "160 MHz".

 

Recommended Solution
  4  
  4  
#2
Options
3 Reply
Re:archer ax50 capped at 1.2gbps-Solution
2022-12-23 11:43:35 - last edited 2022-12-23 13:20:39

  @ibramaswadeh 

 

Hi,

 

You could try if the speed may improve if you set the "Channel Width" of the 5 GHz Wi-Fi from "Auto" to "160 MHz".

 

Recommended Solution
  4  
  4  
#2
Options
Re:archer ax50 capped at 1.2gbps
2022-12-23 13:20:28

  @woozle thanks that did the trick! also i noticed the channel changed to one of dfs channels when i did that, but its alot faster now when im a little away from the router

  0  
  0  
#3
Options
Re:archer ax50 capped at 1.2gbps
2022-12-24 08:39:37

  @woozle hello, i have another problem which is the channel changes back to 36 when it was on 56, and on channel 36 the connection is capped at 1.2gbps, tried to put it manually to 56 again, it worked for like 8 hours then it changed back to 36, is there a solution for that?

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 480

Replies: 3