Jio sim not working after APN settings in my TP LINK MR100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Jio sim not working after APN settings in my TP LINK MR100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
18 Reply
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-07-29 18:47:01

  @bharat1rane  5 months down the line, I don't see any answers. So for those folks reaching here with the same headache, here's what I did to set it up.

 

1. Login to 192.168.1.1 with admin as username and password if you haven't setup yet

2. Go to Advanced

3. Select Network->Internet

4. Bottom of the page, click on create profile

5. Fill in the information but keep APN type as static and APN as jionet

 

AND YOU ARE DONE!

 

***Ensure you have your router on

  0  
  0  
#12
Options
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-07-31 16:18:51
LAN clients are not provided with jio ipv6 dns jio ipv6 dns are 2405:200:800::1 to 2405:200:800::11 xiaom/redmi phones in the lan cannot connect to the internet, where as oppo phones have no issues.. tplink should allow users to add ipv6 dns servers in the DHCP page. it only allows ipv4 address, which jio servers blocks.
  0  
  0  
#13
Options
TP LINK MR100 - not working with jio sim
2023-08-27 10:48:28

  @bharat1rane  sometime it works for a couple kf minutes and then Internet goes away. Shows connected but cannot provide internet

  0  
  0  
#14
Options
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-09-26 05:28:10
Same problem i am facing with TP-Link MR6500v Router
  0  
  0  
#15
Options
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-09-28 15:09:31
  0  
  0  
#16
Options
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-12-01 03:03:18 - last edited 2023-12-01 03:04:08

  @bharat1rane I think i have figured out a way if sim status is "Sim card prepared" and there is not signal blinking in your router) just now.

1. Do Reset router, after that do web login to 192.168.1.1, ideally it would open Quick startup tab (Don't click on next).
2. Go to advanced > internet > create profile> add below APN settings.
3. The profile name should be "internet(default)" without quotes.
4. click save.
5. reboot router.
6. At this point of time you should see the signal blinkers on (which i got it!).
7.  Continue with your usual setup


  0  
  0  
#17
Options
Re:Jio sim not working after APN settings in my TP LINK MR100
2023-12-21 01:17:58

  @bharat1rane Jio sim not work 

  2  
  2  
#18
Options
TP LINK MR100 - not working with jio sim
2024-01-29 13:01:33 - last edited 2024-01-29 13:03:36

  @Pkprabhat  same

bharat1rane wrote

On my MR100 , Jio 4G sim is not working. Not even showing network. VI working fine. I tried another Jio sim, but same result. I have done APN settings aas well. Please suggest.

 

Why it is not working even in Mumbai?

same

bharat1rane wrote

On my MR100 , Jio 4G sim is not working. Not even showing network. VI working fine. I tried another Jio sim, but same result. I have done APN settings aas well. Please suggest.

 

Why it is not working even in Mumbai?

same

bharat1rane wrote

On my MR100 , Jio 4G sim is not working. Not even showing network. VI working fine. I tried another Jio sim, but same result. I have done APN settings aas well. Please suggest.

 

Why it is not working even in Mumbai?

same thing it's happening with me only in Jio sim for Airtel it's working fine 

  0  
  0  
#19
Options