Not able to connect with PC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not able to connect with PC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not able to connect with PC
Not able to connect with PC
2023-03-07 12:44:06
Model: Archer C5  
Hardware Version: V4
Firmware Version:

Connects well with mobile

But not with computers 

Throwing DNS NOT RESPODING ERROR 

 

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:Not able to connect with PC
2023-03-08 08:02:36

@Roshanlal12 

 

Hi,

 

If it is only the computer doesn't work, then you may need to check the settings on the computer itself but not blame the router.

 

Is the computer connected to the router via cable or Wi-Fi? If it is cable, check and make sure the cable is good and qualified, then check if the computer has obtained an IP address from the router like mentioned here.

 

If the IP address is correct, then try to do a ping test, ping the IP of the router first, then ping 8.8.8.8, then ping google.com. If pinging the router IP and pinging 8.8.8.8 are successful, but pinging google.com fails, then change the DNS servers on the router to 8.8.8.8 and 8.8.4.4, then check if you have internet again.

 

This is the guide for your reference to do the ping: How to Use the Ping Command.

If my reply helps with the issue, please click on the arrow pointing upward. If it solves your issue, please click the star to mark it as a "Recommended Solution".
  2  
  2  
#2
Options