When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)
When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)
2023-04-12 00:43:42 - last edited 2023-04-15 01:49:54
Model: TL-WN722N  
Hardware Version:
Firmware Version:

I have a Windows 10 32 bits where this adapter is working well. 

I built a new one with Windows 10 64 bits, and attached the adapter and Windows posted a message that not recognize the USB Adapter.. Prior to install the driver. When I try to install the driver, it post a msg that didn't find the adapter.

 

Any answers?

Thanks.

Cesar

  0      
  0      
#1
Options
1 Accepted Solution
Re:When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)-Solution
2023-04-15 01:49:43 - last edited 2023-04-15 01:49:54

  @woozle It's ok now. I updated the driver via Windows update, and now it's working. Thank you!

woozle wrote

  @Clajner 

 

Hi,

 

Can you please look for a sticker on the backside of your TL-WN722N that lists a serial number and a version number and report back what version you have?

 

Version 1.x of the TL-WN722N needs to use a different driver than the versions 2.x and up.

 

Recommended Solution
  3  
  3  
#3
Options
2 Reply
Re:When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)
2023-04-13 18:12:02

  @Clajner 

 

Hi,

 

Can you please look for a sticker on the backside of your TL-WN722N that lists a serial number and a version number and report back what version you have?

 

Version 1.x of the TL-WN722N needs to use a different driver than the versions 2.x and up.

  2  
  2  
#2
Options
Re:When inserted in an USB port, the TL-WN722N is not recognized by de system (windows 10 64bits)-Solution
2023-04-15 01:49:43 - last edited 2023-04-15 01:49:54

  @woozle It's ok now. I updated the driver via Windows update, and now it's working. Thank you!

woozle wrote

  @Clajner 

 

Hi,

 

Can you please look for a sticker on the backside of your TL-WN722N that lists a serial number and a version number and report back what version you have?

 

Version 1.x of the TL-WN722N needs to use a different driver than the versions 2.x and up.

 

Recommended Solution
  3  
  3  
#3
Options