Home Network Community > Powerline Adapters > how to use 2 powerline kit TL WPA 7617 at the same time
< Powerline Adapters

how to use 2 powerline kit TL WPA 7617 at the same time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how to use 2 powerline kit TL WPA 7617 at the same time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how to use 2 powerline kit TL WPA 7617 at the same time
how to use 2 powerline kit TL WPA 7617 at the same time
2023-05-15 12:34:54 - last edited 2023-05-16 07:59:45
Model: TL-WPA7617 KIT  
Hardware Version: V1
Firmware Version:

Good morning,

I bought 2 TL WPA 7617 kits (2x2 CPL).

How can I use it?

the TL PA 7017 P connects to the router and only uses the 2 other TL WPA 7617.

Or can I use all 4 at the same time on the same electrical network? does it scream one powerline network or 2 powerline networks?

thank you for your enlightenment

  0      
 
  0      
 
#1
Options
3 Reply
Re:how to use 2 powerline kit TL WPA 7617 at the same time
2023-05-16 05:56:16 - last edited 2023-05-16 07:59:45

  @vinou770 

 

Hi, you could use all the four powerline units at the same time within the same powerline network: 

Connect one TL-PA7017 to your router via Ethernet cable, all the three units can be plugged into other locations to extend the network, please note that only two of them have WiFi function, for the other TL-PA7017, you could only connect wired client device via Ethernet cable.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:how to use 2 powerline kit TL WPA 7617 at the same time
2023-05-16 07:59:29

  @Sunshine 

thanks for the feasibility.

concretely should they be paired? 2 by 2?

if you can describe the procedure with pictures.

thank you

  0  
  0  
#3
Options
Re:how to use 2 powerline kit TL WPA 7617 at the same time
2023-05-17 06:20:39

  @vinou770 

 

Hi, let's call the four powerline units as A, B, C and D, you could pair them this way:

1. Pair A and B via pair button

2. Pair A and C via pair button

3. Pair A and D via pair button

 

Note: For how to pair powerline units via pair button, you could refer to How to set up a new secure wireless network using Powerline ac Wi-Fi Kit by Pair button

 

Then all the four units will be paired and in the same powerline network. If there is any further issue, please plug all the four units into wall sockets and let us know the LED status on them, especially the powerline LED which looks like a little house.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 407

Replies: 3

Related Articles
My WPA-7617 doesn't have the wifi's light on
251 0
TL-WPA7617 kit not pairing
327 0
Which powerline to extend TL-WPA 8730 kit?
1163 0
TL WPA7617 Extender and the adapter it came with in the powerline kit.
96 0
TL- PA and TL-WPA powerline adapters
241 0
OneMesh Compatibility on TL-WPA7617 KIT and TL-WPA7517 KIT
480 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.