Home Network Community > SOHO Switches > Switch TL-SG105S V3 port speed
< SOHO Switches

Switch TL-SG105S V3 port speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Switch TL-SG105S V3 port speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Switch TL-SG105S V3 port speed
Switch TL-SG105S V3 port speed
2023-06-07 15:40:40 - last edited 2023-06-21 02:55:39
Model: TL-SG105  
Hardware Version: V3
Firmware Version:

Good afternoon,
I'm having internet speed problems on my television, I did a speedtest and I noticed that on the television I only have 40mbps, while on the computer I have 500mbps.
I have a TL-SG105S V3 switch, with only the computer and television on.
I think that at the time my internet operator configured the switch in relation to the speed of the switch ports.
I tried to access the router's web interface via ip 192.168.0.1 but I can't even access the page.
What can I do to acess the page?
And how do I increase the speed of switch port 3?

 

Thanks.

Greetings,

Bruno

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Switch TL-SG105S V3 port speed-Solution
2023-06-08 14:28:29 - last edited 2023-06-21 02:55:39

  @BrunoF95 

 

TL-SG105S V3 is an unmanaged gigabit switch, i.e. its ports speed is auto negotiated.

There's two possibilities in your case:

1. Your TV LAN port is 100 mb capable only - hence the speed of 40 mbps.

2. Your TV LAN port is 1000 mbps capable, but the switch port negotiated 100 mbps - you should change the ethernet cable (between TV and switch) with another one with good quality, which is CAT 5E/6 branded and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
2 Reply
Re:Switch TL-SG105S V3 port speed-Solution
2023-06-08 14:28:29 - last edited 2023-06-21 02:55:39

  @BrunoF95 

 

TL-SG105S V3 is an unmanaged gigabit switch, i.e. its ports speed is auto negotiated.

There's two possibilities in your case:

1. Your TV LAN port is 100 mb capable only - hence the speed of 40 mbps.

2. Your TV LAN port is 1000 mbps capable, but the switch port negotiated 100 mbps - you should change the ethernet cable (between TV and switch) with another one with good quality, which is CAT 5E/6 branded and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
Re:Switch TL-SG105S V3 port speed
2023-06-08 14:41:14

  @terziyski Thanks for helping.

I tried a different cable, its the same. I think my TV LAN port is only 100mb capable like you said, i will buy a gigabit ethernet to usb 2.0 and try it.

I will let you guys know if it worked.

 

Greetings

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 529

Replies: 2

Related Articles
tl-sg105 port speed question
655 0
TL-SG105s reduces my speeds
270 0
Difference between TL-SG105S and TL-SG105
23010 0
Router Archer VR900 V.3 - Bridge
439 0
TL-SG105s no lights on the network ports
3308 0
TL-SG105S(UN) Ver.4.0 TL-SG105(TDP) differences Ver6.0
88 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.