Expanding existing Powerline Network
![](/avatar/avatar-5.png)
Hi Guys,
I have an existing powerline network comprising a TL-PA9020 & a TL-WPA9610 which I need to expand. Is it possible to just add the newer TL-PA9020PKIT (2 x TL-PA9020P) to give 4 more additional ports?
Thanks in advance for any advice.
KevW56
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You should be able to do that. According to their tech specs:
"Compatible with all AV2000, AV1200, AV1000, AV600, AV500 & AV200 powerline adapters" .
You can also review the PLC FAQ Part 3 if you have more questions regarding that matter.
- Copy Link
- Report Inappropriate Content
@terziyski thank you for your response.
That was the way I understood it too, I just wanted to get someone else's view before I bought the additional kit. Thanks again for your input.
Cheers... KevW56
- Copy Link
- Report Inappropriate Content
You should be able to do that. According to their tech specs:
"Compatible with all AV2000, AV1200, AV1000, AV600, AV500 & AV200 powerline adapters" .
You can also review the PLC FAQ Part 3 if you have more questions regarding that matter.
- Copy Link
- Report Inappropriate Content
@terziyski thank you for your response.
That was the way I understood it too, I just wanted to get someone else's view before I bought the additional kit. Thanks again for your input.
Cheers... KevW56
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-5.png)
Information
Helpful: 0
Views: 439
Replies: 2
Voters 0
No one has voted for it yet.