Deco in Access Point mode still has a seperate SSID
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I've setup my deco via the Deco app. I have intially had to set it up as a router, then I have changed the settings to be an access point. I don't understand why the new network I originally setup up is still braodcasting an SSID when it is now in AP mode?
The setup I have is ISP router > ethernet connection to Deco M9 Plus (in AP mode) > wireless connection to another Deco m9 plus (AP)
I'd be greatful if someone can shed some light!
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Deco mesh will always run its own WiFi network. This is the only way to guarantee seamless roaming of a device between WiFi nodes.
For Deco, AP mode means that third-party router will manage network (IP addresses, static IPs, whitelisting, etc.) while Deco mesh will provide WiFi and (almost) nothing else.
- Copy Link
- Report Inappropriate Content
Exactly, your Deco SSID will become your new wireless network and you should only connect to that. What I do is disable the WiFi in your main router and then rename the Deco SSID to the same name as your original network with the same password.
That way your existing devices will just start connecting to deco WiFi without needing to reconnect them all.
- Copy Link
- Report Inappropriate Content
Deco mesh will always run its own WiFi network. This is the only way to guarantee seamless roaming of a device between WiFi nodes.
For Deco, AP mode means that third-party router will manage network (IP addresses, static IPs, whitelisting, etc.) while Deco mesh will provide WiFi and (almost) nothing else.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ManchesterUK wrote
Thanks for taking the time to respond Alexandre. Still not sure I fully understand why it broadcasts a separate SSID, but I have hidden this SSID.
You do not want devices connect to Deco mesh???
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ManchesterUK wrote
I set it to AP mode so I can just extend the signal of the main router. Or am i missing something? Thanks.
Deco mesh will not extend the signal of the main router. Deco mesh runs its own WiFi network.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Exactly, your Deco SSID will become your new wireless network and you should only connect to that. What I do is disable the WiFi in your main router and then rename the Deco SSID to the same name as your original network with the same password.
That way your existing devices will just start connecting to deco WiFi without needing to reconnect them all.
- Copy Link
- Report Inappropriate Content
Assume I have the main (ISP) router in one room and 2 deco units in other rooms, connected by Ethernet to that main ISP router (and not to one another).
Could you please explain why deco mesh wont extend the 3rd party router's SSID? Is that the case for any mesh system, that it cannot extend 3rd party (e.g. ISP's router) SSID and need to have it's own Wifi network?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3477
Replies: 8
Voters 0
No one has voted for it yet.