Business Community > WiFi > EAP660HD HW version 1.0 vs. 1.60
< WiFi

EAP660HD HW version 1.0 vs. 1.60

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP660HD HW version 1.0 vs. 1.60

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP660HD HW version 1.0 vs. 1.60
EAP660HD HW version 1.0 vs. 1.60
2023-08-08 07:15:40 - last edited 2023-08-09 05:41:19
Model: EAP660 HD  
Hardware Version: V1
Firmware Version: EAP660HD(US)_V1_1.1.1 Build 20220118

I bought a refurbished Unit on Amazon. Setup as standalone since I am on a Mac (Controller Software that runs on Windows and Linux)! When I went to update the firmware I see it says HW version is 1.0 but sticker on under belly of monster is 1.60. Am I running the latest and faster HW? I read in another post TP-LINK routers have a numbering system where the digit after the decimal designates country of Mfg and .6=Vietnam. Not sure if 0 is US. Can anyone comment on functionality and speed between the HW versions? is there a difference between 1.0 and 1.60 other than where it was manufactured? I downloaded FW for 1.6 and the darn thing updated to the latest FW for 1.0: EAP660HD(US)_V1_1.1.1 Build 20220118.

 

So I am running the latest firmware for 1.0 and blazing fast speed: 1 gig almost, from the 130 mbps I was getting from my IP's router! I am happy but I want to be happier if I have the latest unit!

 

Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:EAP660HD HW version 1.0 vs. 1.60-Solution
2023-08-08 16:41:54 - last edited 2023-08-09 05:41:19

  @oceandude 

 

Hey

 

Yes you sorta answered your own question, the hardware version is made up of 2 codes, namely the HARDWARE_VERSION followed by the FACTORY_ID

 

I cant remember exactly what the FACTORY_IDs are..   but they are .0   .6    and   .8    as you mentioned fairly sure .6 is Vietnam, that does ring a bell.

 

The first number is just the hardware ID

 

Therefore products with  1.0   1.6  and 1.8 are all physically and software-wise the same, just made in different locations.    Firmwares are generic, so usually applies for all 1.x devices (as they are identical)

 

When v2 comes out it will likely be 2.0   2.6   and 2.8  as expected, again one firmware for them all

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:EAP660HD HW version 1.0 vs. 1.60-Solution
2023-08-08 16:41:54 - last edited 2023-08-09 05:41:19

  @oceandude 

 

Hey

 

Yes you sorta answered your own question, the hardware version is made up of 2 codes, namely the HARDWARE_VERSION followed by the FACTORY_ID

 

I cant remember exactly what the FACTORY_IDs are..   but they are .0   .6    and   .8    as you mentioned fairly sure .6 is Vietnam, that does ring a bell.

 

The first number is just the hardware ID

 

Therefore products with  1.0   1.6  and 1.8 are all physically and software-wise the same, just made in different locations.    Firmwares are generic, so usually applies for all 1.x devices (as they are identical)

 

When v2 comes out it will likely be 2.0   2.6   and 2.8  as expected, again one firmware for them all

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 714

Replies: 1

Related Articles
EAP660HD v1.2.9?
712 0
EAP660HD doesn't startup
1158 0
OC200 Hardware version 1.0 vs 2.6
4970 0
Set-up Mesh Wifi with EAP660HD with RE
276 0
 new EAP660HD
899 0
 Mesh with EAP660HD and EAP245
789 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.