@Udhaya Hi , Could you provide the latest firmware link. 

  @mahat 
To all who are having configuration issues.

Internet configuration (PPPoE GPON/EPON):
Type: PPPoE

VLAN: Ask LCO or contractor.
Multucast VLAN: Usually disabled but ask to confirm.

Username

Password: *****

MTU: 1460 (best), 1480 (default), 1492 (max)

                  For finding the optimal MTU checkout Ping Test to determine Optimal MTU Size on Router from NetGear. 
NAT, IGMP Proxy enabled.

DNS set: 1.1.1.1; 8.8.8.8; or vice versa

IPv6: Enable only if you get some gateway IP in Internet IPv6 section in the Status page (indicates IPv6 available at BNG).
DNS IPv6 set: 2001:4860:4860::8888; 2606:4700:4700::1111; or vice versa

Telephone Interface (IPoE GPON/EPON):

Type: Dynamic IP
VLAN: Generally 1849 or 1831 / 1830 but ask to confirm.
MTU: 1500 (default, do not change)
NAT, IGMP Proxy enabled.

IPv6: Enable only if you get some gateway IP in Internet IPv6 section in the Status page (indicates IPv6 available at BNG).

Interface Binding: VoIP

Telephony Setup:
Provider: Other
Phone number: +91[std-code][8-digit-landline-no]
Registrar Address: Ask for the address.
Authentication ID: +91[std-code][8-digit-landline-no]
Password: Ask.
SIP Proxy: Ask for the address (same as registrar address).
Outbound Proxy: Ask for the IP or the address.
 

Other setting (iykyk): 

QOS: enabled
DOS Protection enabled & set to high.

Reboot Schdule: Everyday 3am to 6am.
LAN DNS (set manually if you wish).

  @Pradeep_R can u plz share the configuration details, my local isp provider is supporting, they suggesting me to buy new router, if u share the configuration it will be usef

Hi All,

There is no issue with the firmware. I have completed the configuration and made a post about it. Please visit the post using the URL below:

techwave|j2dk|in use dote insterd of | to form the url

It is not allowing me to put the link or snap here

Thanks.

DP

  @sasebruh i have downloaded the brazil version, as suggested some where in this post, but still i have failed to activate voice , however my internet connection is working well. it will be great help, if you can forward me the firmware link to try once again (confeder8.international@gmail.com) thanks in advance.

  @Udhaya 

Udhaya wrote

  @mahat update first latest firmware i give link

https://drive.google.com/file/d/1RelMo__MgVKp0puWvGR7DIebURijEWLp/view?usp=drive_link

File does not exist any more in Google drive. Do you have the latest version firmware with update for BSNL?

  @Confeder8 if you reflash the firmware with the one that is provided by tp link do all the settings config step by step without repeating any step then only voice works. Firmware will be provided by tp link support call via email or via online support of them if u need firmware that i am using then u can dm me. I had put the link i got from tp link in my old msg as well. Its alot of trouble to get things work so anyone thinking of buying this one just dont.