xPON
Hi all Router model: XX231v. I do everything according to the instructions, hold the reset button until the power LED starts flashing quick, after which router reboot, but nothing changes, web setup s
0Helpful
62Views
I installed this device in my house, put fiber directly on it, it registered without issues. But I noticed a odd issue: Any download is always capped at 50Mb/s (my plan is 500Mb/s for both downloads a
55Helpful
12705Views
@HoiWong @Kevin_Z Recently purchased xx530v and i configured it with bsnl ftth it's working normally in epon mode for 1 or 2 days but after random power cycle after power resume this router goes into
BSNLNetwork Connectivity
2Helpful
74Views
I have a USB drive connected to my XX530V. However, under the USB sharing option, the USB storage cannot be accessed through FTP on port 21 from the intranet. Furthermore, the FTP/HTTP/HTTPS services
VoIPUSB sharing
By
Jeyadheepan
· Latest post Friday
by Joseph-TP
0Helpful
225Views
Hello Team, I recently purchased the XX530V and have been experiencing connectivity issues since setting it up. At home, I am using an EasyMesh configuration with an Ethernet backhaul. The XX530V is c
EasyMesh
1Helpful
138Views
The XZ000 G7 was bought independently; when paired with Airtel, it gives O5, but no real connection exists. PPPoE or Static IP bought donset Work. There is no response from the ISP side to PPPoE packe
XZ000-G7
3Helpful
116Views
Hello, everyone! Due to changes after Android 15, there have been new updates regarding energy saving, which has caused issues in ipv6 connectivity due to low RA Lifetime for IPV6. Devices with Androi
IPv6Network ConnectivityAndroid 15
4Helpful
2377Views
after i updating with frimware version XC220-G3v_(US)_V2_1.14.0_0.8.0 Build 250317 the lan port 4 is not working. then after 3 days i saw latest firmware version XC220-G3v_(US)_V2_1.14.0_0.8.0_Build25
Firmware Update
0Helpful
302Views
I was enjoying TP-Link XX530V XPON as the main OLT (a Direct Patch Cord from Airtel was inserted into the XX530V Airtel Nokia Router, which was shut down). Inernet over Wi-Fi and LAN was working fine
4Helpful
511Views
Dear Team Please solve from outside network XX530V FTP SERVER AND VPN SERVER CAN GIVE SPEED OVER 1-3 MBPS
Network Connectivity
By
Sovanbera77
· Latest post 2026-03-19 08:06:06
by Kevin_Z
0Helpful
212Views
TP LINK XX530V BSNL VOIP is not working get error " register failed, response code( 502) " Caption
VoIPInstallationNetwork Connectivity
1Helpful
1214Views
I have a TP- Link XX530V v1 router / GPON. I have upgraded it twice since I bought it but the version on the foot of the Web Interface remains unchanged. I get no error message whatsoever when I upgra
Firmware Update
2Helpful
294Views