Problem Internet speed with Huawei olt
Hello
I have two fiber optic modems.
Huawei 8546m
Tp-link xx230v
My speed on my Huawei modem with Wi-Fi 2.4 is around 50 to 100 Mbps.
But when I connect to the TP-Link modem, my speed drops to 30 to 40 Mbps.
Isp Huawei OLT
When I connect fiber to the Huawei modem
And I connect to TP-Link with a LAN cable, the internet will go up to 400 Mbps.
This time I bridged the Huawei One modem.
and settings pppoE I did it on my T-Link modem and the speed still didn't go above 40 Mbps.
What is the reason? When the modem Xx 230It is connected to the internet provider, it works poorly, but it is very good as a router?!
Can anyone help me?
Is the modem not compatible with Huawei OLT?
In the image above, fiber optic internet is connected to a TP-Link modem.
In this image, the fiber optic internet is connected to the Huawei modem, but it provides internet to the T-Link modem via a LAN cable.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Balouchi, thanks for posting in the TP-Link community.
Do you enable MAC clone on the XX230v? Please check alb3530's suggestion to try disabling it:
https://community.tp-link.com/en/smart-home/forum/topic/839982?replyId=1605164
- Copy Link
- Report Inappropriate Content
Hello @Balouchi
I hope you've figured it out once received my previous reply.
However, if the reported capped 50 Mbps download speed issue over PPPoE with MAC Clone still persists, please find a pre-release firmware for your XX230v V1 and confirm whether it works:
https://community.tp-link.com/en/home/forum/topic/839982?replyId=1675476
- Copy Link
- Report Inappropriate Content
متأسفانه ISP Can't solve the problem. Does anyone know of a solution?
- Copy Link
- Report Inappropriate Content
Hello @Balouchi, thanks for posting in the TP-Link community.
Do you enable MAC clone on the XX230v? Please check alb3530's suggestion to try disabling it:
https://community.tp-link.com/en/smart-home/forum/topic/839982?replyId=1605164
- Copy Link
- Report Inappropriate Content
Hello @Balouchi
I hope you've figured it out once received my previous reply.
However, if the reported capped 50 Mbps download speed issue over PPPoE with MAC Clone still persists, please find a pre-release firmware for your XX230v V1 and confirm whether it works:
https://community.tp-link.com/en/home/forum/topic/839982?replyId=1675476
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1118
Replies: 3
Voters 0
No one has voted for it yet.