Home Network Community > Feature Request (Extenders) > router MR600 and repeaters RE315 via cable with onemesh
< Feature Request (Extenders)
 
1
Votes

router MR600 and repeaters RE315 via cable with onemesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
 
1
Votes

router MR600 and repeaters RE315 via cable with onemesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
router MR600 and repeaters RE315 via cable with onemesh
router MR600 and repeaters RE315 via cable with onemesh
2023-08-16 21:25:24 - last edited 2023-08-18 01:05:34

Is it possible scenario like in subject. I need to join router MR500 and repeaters vis ethernet cable and manage them as one mesh ? thanks for yoir support ..-

#1
Options
12 Reply
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 07:20:47 - last edited 2023-08-18 01:05:23

  @peceq 

 

That's not possible. OneMesh doesn't support an ethernet backhaul - check OneMesh FAQ - Q5/A5.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
#2
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 08:27:21 - last edited 2023-08-18 01:05:23

  @terziyski 

Is there another way to do it with cable with mr500 ? Do you have any experience with extenders in onemesh?is it work well ?

#3
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 08:44:06 - last edited 2023-08-18 01:05:23

  @peceq 

 

If you insist on cable connection you could configure RE315 in AP mode and connect to MR500 to expand its wireless coverage.

This won't be a mesh, but you still will achieve roaming depending on the wireless devices you use in your LAN.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
#4
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 10:32:52 - last edited 2023-08-18 01:05:23

  @terziyski 

 

What is Disadvantages of this solution ? I need Mr 500 and two or 3 ap,should I set ssid name on each of ap or only on Mr500 

#5
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 11:35:19 - last edited 2023-08-18 01:05:23

  @peceq 

 

The advantage of RE AP mode is that you can use a cable connection.

The disadvantage is that it's not a mesh and the roaming between REs won't be so smooth as with mesh.

You have to set SSIDs (either the same or different - your choice) on MR500 along with all the REs manually.

There's another option - MR500 with its wireless radio disabled and Deco mesh in AP mode (with ethernet backhaul).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
#6
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 12:23:13 - last edited 2023-08-18 01:05:23

  @terziyski 

So i will use deco m4 with mr 500, can I use mesh with deco as access point ? I Turn off wifi on mr 500, isi it right ? 

#7
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 13:45:22 - last edited 2023-08-19 09:58:20

  @peceq 

 

Yes, that's correct. Deco M4 is a good choice.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
#8
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 14:26:13 - last edited 2023-08-18 01:05:23

  @terziyski 

And it will be work in easy mesh ? I mean only deco devices...

#9
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-17 14:34:20 - last edited 2023-08-18 01:21:05

  @peceq 

 

It will work as Deco mesh - among all Deco units.

Check the difference between the Deco mesh, EasyMesh, Onemesh and Omada mesh - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
#10
Options
Re:router MR600 and repeaters RE315 via cable with onemesh
2023-08-25 09:38:29

  @terziyski

 

hi, how about connection mr600 with deco m4 ? As i know i can use router as a lte bridge and set routing on m4. Do you know , if i use Access point on m4, one mesh will occured ?  or one device (m4) should be router at last ?  

#11
Options
12

Information

Helpful: 1

Views: 1212

Replies: 12

Voters 1

voter's avatar
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.