router MR600 and repeaters RE315 via cable with onemesh
router MR600 and repeaters RE315 via cable with onemesh
Is it possible scenario like in subject. I need to join router MR500 and repeaters vis ethernet cable and manage them as one mesh ? thanks for yoir support ..-
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
That's not possible. OneMesh doesn't support an ethernet backhaul - check OneMesh FAQ - Q5/A5.
- Copy Link
- Report Inappropriate Content
Is there another way to do it with cable with mr500 ? Do you have any experience with extenders in onemesh?is it work well ?
- Copy Link
- Report Inappropriate Content
If you insist on cable connection you could configure RE315 in AP mode and connect to MR500 to expand its wireless coverage.
This won't be a mesh, but you still will achieve roaming depending on the wireless devices you use in your LAN.
- Copy Link
- Report Inappropriate Content
What is Disadvantages of this solution ? I need Mr 500 and two or 3 ap,should I set ssid name on each of ap or only on Mr500
- Copy Link
- Report Inappropriate Content
The advantage of RE AP mode is that you can use a cable connection.
The disadvantage is that it's not a mesh and the roaming between REs won't be so smooth as with mesh.
You have to set SSIDs (either the same or different - your choice) on MR500 along with all the REs manually.
There's another option - MR500 with its wireless radio disabled and Deco mesh in AP mode (with ethernet backhaul).
- Copy Link
- Report Inappropriate Content
So i will use deco m4 with mr 500, can I use mesh with deco as access point ? I Turn off wifi on mr 500, isi it right ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
And it will be work in easy mesh ? I mean only deco devices...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
hi, how about connection mr600 with deco m4 ? As i know i can use router as a lte bridge and set routing on m4. Do you know , if i use Access point on m4, one mesh will occured ? or one device (m4) should be router at last ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1306
Replies: 12