How to disable auto shut down when you are in shut down window

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to disable auto shut down when you are in shut down window

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to disable auto shut down when you are in shut down window
How to disable auto shut down when you are in shut down window
2023-08-18 21:09:40 - last edited 2023-08-22 00:57:11
Model: RE200  
Hardware Version: V5
Firmware Version:

I had enabled auto shut down for my device between 11pm to 6 am 

 

And one day I wanted to disable this but I was in the above window and could not see the option or neither it showed any any options to login to device and change settings.

 

How should I proceed in case of such situation.

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to disable auto shut down when you are in shut down window-Solution
2023-08-18 22:41:13 - last edited 2023-08-22 00:57:11

  @Roshanspec 

 

Hi,

 

Unplug the RE200 from the wall socket, wait around 20 seconds to allow it to de-energize completely, then plug it back in the wall socket.

 

After it has booted up again (could take a minute) you should be able to log in and operate the RE200 normally. It should ignore the currently running power-off time window and remain powered on until the next power-off time is reached.

 

It works like that on my RE305, so I assume it will be the same on your RE200.

 

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:How to disable auto shut down when you are in shut down window-Solution
2023-08-18 22:41:13 - last edited 2023-08-22 00:57:11

  @Roshanspec 

 

Hi,

 

Unplug the RE200 from the wall socket, wait around 20 seconds to allow it to de-energize completely, then plug it back in the wall socket.

 

After it has booted up again (could take a minute) you should be able to log in and operate the RE200 normally. It should ignore the currently running power-off time window and remain powered on until the next power-off time is reached.

 

It works like that on my RE305, so I assume it will be the same on your RE200.

 

Recommended Solution
  1  
  1  
#2
Options