Home Network Community > Wi-Fi Routers > 2.4Ghz slow after latest firmware update
< Wi-Fi Routers

2.4Ghz slow after latest firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

2.4Ghz slow after latest firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
2.4Ghz slow after latest firmware update
2.4Ghz slow after latest firmware update
2023-09-15 21:00:03
Tags: #Firmware Update
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.3.2 Build 20230906 rel.52143(4555)

Hello,

 

Since I've updated to the latest firmware my 2.4Ghz wifi is a fraction of what its supposed to be. On the other hand the 5Ghz band is fine.

 

Any help to diagnose this would be much appreciated.

 

Thanks

  0      
 
  0      
 
#1
Options
12 Reply
Re:2.4Ghz slow after latest firmware update
2023-09-18 07:58:28

  @dephreq 

 

Hi, did you try to change the 2.4G WiFi channel and channel width? 

 

If the problem still exists, please let us know your ISP modem speed, wired speed of the AX6000 Router, 2.4G and 5G Speed of the router for comparison.

Please also check the 2.4G Wireless link speed on your 2.4G client device:

How to check the associated/link speed on a wireless client

 

In addition, how many client devices are usually connected to the router? and what are they?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:2.4Ghz slow after latest firmware update
2023-09-18 19:02:27

Hey @Sunshine, thanks for jumping on this.

 

I have indeed changed the WiFi channel and width using an analyzer to find the cleanest channels. I've tried multiple and all have the same performance.

 

ISP: Community Fibre (1Gbit)

Wired speed: 920Mbps

 

2.4G speed: ~80Mbps

5G speed: ~770Mbps

 

Number of devices: ~10 [PC, Laptops, phones, couple IoT devices]

 

Associated speed 2.4G: 542Mbps (full signal)

 

The 2.4G speed makes no sense as it was working perfectly fine before the updated firmware and I have changed nothing with regard to devices etc.

 

I appreciate your help, thanks!

 

 

  0  
  0  
#3
Options
Re:2.4Ghz slow after latest firmware update
2023-09-18 19:19:05

  @dephreq I have the exact same issue. Latest firmware made wifi terribly slow. This is a TP link issue. TP link - please help.

  1  
  1  
#4
Options
Re:2.4Ghz slow after latest firmware update
2023-09-18 19:30:38

  @Doug_H Also - FYI, after disabling Smart connect on my Archer AX6000, after the latest firmware update, now on 2.4 G only wifi works. When coupled with smart connect speeds are painfully slow. This happened after updating to latest firmware yesterday.

  0  
  0  
#5
Options
Re:2.4Ghz slow after latest firmware update
2023-09-23 08:01:45

@Sunshine Any updates on this?

  0  
  0  
#6
Options
Re:2.4Ghz slow after latest firmware update
2023-09-25 10:01:23

  @dephreq 

 

Hi, do you still remember the 2.4G speed before the firmware update? And did you disable Smart Connect?

 

We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:2.4Ghz slow after latest firmware update
2023-09-25 10:21:51

  @Sunshine Highly appreciated, I've received the email and responded.

  0  
  0  
#8
Options
Re:2.4Ghz slow after latest firmware update
2023-09-25 10:23:34
And for others watching this thread, I have been advised to disable QoS entirely, which has improved 2.4G's performance a little.
  1  
  1  
#9
Options
Re:2.4Ghz slow after latest firmware update
2023-09-25 10:29:35

  @dephreq 

 

Thanks for the update, please let the community know if there is any update after troubleshooting with our support engineers.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#10
Options
Re:2.4Ghz slow after latest firmware update
2023-11-21 17:22:19 - last edited 2023-11-21 17:35:32

  @Sunshine 

Sorry for the late reply… I also have a very bad performance after updating the firmware as you can see from my own monitoring (image is downlink; uplink is ok and no image is provided. you won't see any difference before/after Nov, 8th with uplink - the date when I updated the firmware):

 

Firmware: 1.3.2 Build 20230906 rel.52143(4555)

Hardware: Archer AX6000 v1.0

 

 

There's no change with QoS en/disabled.

I don'd use "Smart Connect" - there's a SSID for 2,4 GHz and another SSID for 5 GHz WiFi.

Transmit Power is high for both WiFi.

Channel Width is 40/160 MHz for 2,4/5 GHz.

Channel is Auto/36 for 2,4/5 GHz.

Mode is mixed-everything for both WiFi.

MU.MIMO is enabled.

 

iperf3 within the same SSID from Macbook (WiFi) to Linux Desktop (1GBit-wired) is really fast when both devices are "on the same BSSID: 700, 800 Mbit and more.

 

There's also a TP-RE700X Range Extender (with EasyMesh enabled) with a current Link Speed at my AX6000: 412Mbps (2.4GHz) 648Mbps (5GHz) (every time I check this both values are around/in this range!):

 

Firmware: 1.1.4 Build 20230509 Rel. 78185

Hardware: RE700X v1.0

 


 

IPS is 1000 Mbit Down and 50 MBit Up.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 2426

Replies: 12

Tags

Firmware Update
Related Articles
Can't update to latest firmware
461 0
 After the latest firmware update, the internet connectivity is too slow in our office
841 0
Wi-Fi super slow after latest firmware update (X90)
593 0
Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2
806 0
Archer AX6000 online upgrade don´t show latest firmware
859 0
Archer C6 V2.0 2.4Ghz Wi-Fi problems after latest firmware update
2434 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.