Business Community > Gateways > How to allow access from a network to a IP-adress (server)
< Gateways

How to allow access from a network to a IP-adress (server)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to allow access from a network to a IP-adress (server)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to allow access from a network to a IP-adress (server)
How to allow access from a network to a IP-adress (server)
2023-12-18 20:26:46 - last edited 2023-12-19 11:32:51
Tags: #ACL
Model: ER7212PC  
Hardware Version: V1
Firmware Version: 1.1.1

Hello!

I have a network Network called "CCTV" which is where all my cameras are in. Now I have a FTP server in a network called "TECH" and I want to set the FTP server in the cameras so the record on the FTP server. But now the Problem: I have an ACL which blocks the acces of "CCTV" to "TECH", so that also affects the FTP server. How do I allow the "CCTV" network to acces the FTP server with only the gateway?

 

Many thanks in advance
Greetings Colin

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:How to allow access from a network to a IP-adress (server)-Solution
2023-12-19 09:42:16 - last edited 2023-12-19 11:32:51

Hi @Colinu 

Thanks for posting in our business forum.

Colinu wrote

Hello, thanks for your reply! I have tried that already but I don't find a way to set up this ACL as a Gateway ACL. But I have to do it as a Gateway ACL because I only havet the gateway and a Acces point in this network. Greetings Colin

Unfortunate that the GW ACL does not support IP-Port Group yet.

If you have to use it now, either to get a switch or try to set it up in standalone mode where you can set up the Service Type yourself.

 

This IP-Port Group in GW ACL has been submitted to the dev and will come out in the future.

Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:How to allow access from a network to a IP-adress (server)
2023-12-19 05:51:13

Hi @Colinu 

Thanks for posting in our business forum.

Set up another ACL to allow the access then. SRC and DST based on your plan. You should use set Service as FTP or specify the IP-Port group.

  0  
  0  
#2
Options
Re:How to allow access from a network to a IP-adress (server)
2023-12-19 09:12:20
Hello, thanks for your reply! I have tried that already but I don't find a way to set up this ACL as a Gateway ACL. But I have to do it as a Gateway ACL because I only havet the gateway and a Acces point in this network. Greetings Colin
  1  
  1  
#3
Options
Re:How to allow access from a network to a IP-adress (server)-Solution
2023-12-19 09:42:16 - last edited 2023-12-19 11:32:51

Hi @Colinu 

Thanks for posting in our business forum.

Colinu wrote

Hello, thanks for your reply! I have tried that already but I don't find a way to set up this ACL as a Gateway ACL. But I have to do it as a Gateway ACL because I only havet the gateway and a Acces point in this network. Greetings Colin

Unfortunate that the GW ACL does not support IP-Port Group yet.

If you have to use it now, either to get a switch or try to set it up in standalone mode where you can set up the Service Type yourself.

 

This IP-Port Group in GW ACL has been submitted to the dev and will come out in the future.

Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 1

Views: 696

Replies: 3

Tags

ACL
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.