RE200 not keeping seperate SSID from main router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE200 not keeping seperate SSID from main router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

lefman

2023-12-30 20:04:53 - last edited 2023-12-30 21:57:25

Posts: 3

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2023-12-30

RE200 not keeping seperate SSID from main router

2023-12-30 20:04:53 - last edited 2023-12-30 21:57:25

Model: RE200

Hardware Version: V5

Firmware Version: 1.0.23

Hello, I have 2 AC750 RE200 extenders which worked just fine with a seperate SSID from the main router for some time. I've just updated their firmware to ver 1.0.23 and since the update the won't keep their seperate SSIDs. They just "reset" and clone the main router SSID. I've tried factory resets (both from tether app and by pressing the button), I chose different SSIDs name etc. They seem to instantly blink their leds to get the new SSID, then another blink and the revert back to the router SSID. Any thoughts would be greatly appreciated.

1 Accepted Solution

woozle

LV5

2023-12-30 21:25:57 - last edited 2023-12-30 21:57:25

Posts: 2779

Helpful: 1859

Solutions: 474

Stories: 0

Registered: 2020-05-01

Re:RE200 not keeping seperate SSID from main router-Solution

2023-12-30 21:25:57 - last edited 2023-12-30 21:57:25

@lefman

Hi,

Then maybe this https://community.tp-link.com/en/home/forum/topic/620150 applies to the RE200 V5 as well.

Since there is no firmware fix for this model available, can you check whether your main router has an (Easy)Mesh ON/OFF switch?

RE200 not keeping seperate SSID from main router

RE200 not keeping seperate SSID from main router

Information

Voters 0

Tags