Port Forwarding Issue On TP-Link ER707-M2 Omada
Hello,
I recently started the move from Synology router to Tp-Link Omada solution.
I have different services in my network like Nginx & Bitwarden....
I try to put in ln place port opening (80-443-8181) for Nginx, and port forwarding.
As far As i understood the port forwarding in TP-link should open the port (80-443-8181) in the firewall once created. I did 3 new rules in Transmission/NAT/port forwarding.
I'm facing issue because all ports are still closed in my public WAN ip .
Thanks a lot in advanced for your help
Thanks for posting in our business forum.
If you can give the screenshots for your steps/results by following this guide.
Mosaic your sensitive information but make it still readable to tell your IP class.
So next time if you need help from me, it is also best for you to include the pictures. I don't rely on the word description unless I witness what you configured and confirm them correct.
Hello ,
Thanks for your response.
Yes I did one per port, and ports are always closed
I don't know what. to do more.
Rgds
I have several port NATs on the ER707-M2 which all work as they should. what you have to watch out for is that the router is not behind another router. then it will be double NAT, if you have another router, you must also do NAT there as well.
so the router must have a public IP on the WAN or you must also do NAT in the router that has the WAN IP.
if you have created ACLs, delete them. that's not necessary
Thanks for posting in our business forum.
First, both replies from others are correct. They have at least verified it is not the firmware issue.
Filter, Troubleshooting, and you can find this article helpful:
