External Atenna for MR100
i'm planning to buy antenna for my MR100 and after searching in the forum i see some thread about external antenna port issue and such so i want to ask if this thing will work on MR100
here's the picture of the external antenna 
The spec for the antenna
- Antenna Type : OMNI DIRECTIONAL 360 ANTENNA
- Gain Average : 12dBi
- Frequency: 800Mhz / 900Mhz / 1800Mhz / 2100Mhz, 2400Mhz, 2700Mhz. Wideband 698-960-1710-2700Mhz
- Support Network: 2G, 3G, HSDPA, 4G LTE, 4G DCS, 4.5G
- Frequency Range (MHz) : 700~2700MHz
- Polarization Type : Horizontal & Vertical
- Input Impedance : 50Ω
- Horizontal Beamwidth : 360°
- Vertical Beamwidth : 7°
- Isolation : >30dB
- Rated Wind Velocity : 126km/h
- VSWR: 2.0 : 1
- Working Temperature : -40°C~+65°C
- Cable Length : 2M
Usually you need to make sure the interface type and frequency range are matched.
The interface type of original antennas is SMA male, you could double check the description of the antenna to see if it is also SMA male. And the frequency supported by MR100 are as below which seems to match with the antenna.
Usually you need to make sure the interface type and frequency range are matched.
The interface type of original antennas is SMA male, you could double check the description of the antenna to see if it is also SMA male. And the frequency supported by MR100 are as below which seems to match with the antenna.
