Home Network Community > 5G/4G Wi-Fi Routers/MiFi > New router will not connect to internet
< 5G/4G Wi-Fi Routers/MiFi

New router will not connect to internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

New router will not connect to internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New router will not connect to internet
New router will not connect to internet
2024-01-08 08:00:26 - last edited 2024-01-10 07:50:20
Model: Archer MR200  
Hardware Version: V6
Firmware Version:

Hi, I have been trying to set up my router but no matter what I have tried I am unable to connect to the internet. I have tried the troubleshooting suggestions but have had no luck. My sim card will work in my phone. I'm not sure if there's something wrong with the router or me? Any advice?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:New router will not connect to internet-Solution
2024-01-10 02:08:58 - last edited 2024-01-10 07:50:20

  @Jwf 

 

Yes, it shows the phone is using band 28, but MR200 doesn't support band 28, that is why it cannot receive the signal.

 

It is recommended to confirm with Telstra whether they support any other 4G band in your area except for band 28, if not, I am afraid you need to get another product that supports band 28 such as Archer MR600.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#7
Options
7 Reply
Re:New router will not connect to internet
2024-01-09 07:14:31

  @Jwf 

 

When you test the SIM card on your phone, please enable phone hotspot as well to ensure it is allowed to share internet to multiple devices.

Then insert the SIM card into the MR200, share with us screenshots of Advanced->Status page, Advanced->Network->Internet page along with the system log file.

 

By the way, who is your ISP please?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#2
Options
Re:New router will not connect to internet
2024-01-09 09:12:35

  @Sunshine thanks for your quick response.

My ISP is Telstra. I have tried to upload the photos I have taken of the laptop screen, but it comes up with an error of Image Source has no url - or something similar to that. Any ideas? 

 

  0  
  0  
#3
Options
Re:New router will not connect to internet
2024-01-09 09:44:25

  @Sunshine 

Sorry, I didn't give it enough time to upload. See what you're working with??? 😁 Please let me know if you need any more pics. 

  0  
  0  
#4
Options
Re:New router will not connect to internet
2024-01-09 10:00:10 - last edited 2024-01-09 10:00:35

  @Jwf 


Hi，based on the screenshot, there is no service at all and the system log shows "Registration denied by the visible network" which usually means denied by the base station.

1. Please try factory reset the MR200 by holding reset button for 10s until power LED starts flashing

2. If Network Type still shows No Service on Status page, please insert the same SIM card into your phone again and check which 4G band the phone is using: 

How to check the 4G band working on our smartphones

 

Then check if MR200 supports that 4G band or not, here is the network type and bands supported by MR200:

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:New router will not connect to internet
2024-01-09 13:38:20

  @Sunshine does this tell you anything?

  0  
  0  
#6
Options
Re:New router will not connect to internet-Solution
2024-01-10 02:08:58 - last edited 2024-01-10 07:50:20

  @Jwf 

 

Yes, it shows the phone is using band 28, but MR200 doesn't support band 28, that is why it cannot receive the signal.

 

It is recommended to confirm with Telstra whether they support any other 4G band in your area except for band 28, if not, I am afraid you need to get another product that supports band 28 such as Archer MR600.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#7
Options
Re:New router will not connect to internet
2024-01-10 06:27:33

  @Sunshine 

Thanks for your help. That's very disappointing.

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 550

Replies: 7

Related Articles
New router unable to connect to internet via PPPOE
4369 0
 New TPLink router - can connect to the router though not to the internet - Help !
967 0
 Unable to connect RE220 to new internet provider router
353 0
 Unable to connect RE220 to new internet provider WIFI router
272 0
new router internet lamp red and cannot connect to the modem
240 1
 new router won’t stay connected OR connect to internet. old tplink works
288 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.