Archer c80 problem
Hello I'm already writing a 4th request for an existing issue, I haven't received any help yet. After updating the app, Tether asks for a password again when trying to connect remotely, but does not accept it. When will I get help instead of a standard reply with a useless link...?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If you have troubles setting up the router via tether app you can use this video guide.
In order to do that successfully you have to reset the device to its factory defaults - press and hold the reset button until all LEDs turn on.
- Copy Link
- Report Inappropriate Content
Whiich password do you use in tether app ? You should use your router administrative password.
To check if you enetering the correct password try login locally via web browser into your router WebGUI.
- Copy Link
- Report Inappropriate Content
I also used the password that is indicated on the wifi router itself, it does not accept it.
- Copy Link
- Report Inappropriate Content
Tether app uses your router administrative password - not the wireless password that is printed on the bottom sticker or in the wireless settings.
You can reset the router and re-configure from scratch. Set an administrative password, write it down and then use it in the tether app.
Here's a guide which you could follow to set up your router with the tether app.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Asciavadas I can't go into its settings, only to this window, and then it asks for a password.
- Copy Link
- Report Inappropriate Content
If you have troubles setting up the router via tether app you can use this video guide.
In order to do that successfully you have to reset the device to its factory defaults - press and hold the reset button until all LEDs turn on.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 641
Replies: 6
Voters 0
No one has voted for it yet.