Time resets on crash, no logs
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm trying to troubleshoot a WDS on a C9 but upon every crash it resets time to 2016 and all logs are lost.
Is there any way to fix this or workaround to get my hands on the crash data?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When using WDS time can't be synchronized automatically because you're not using your C9 WAN anymore.
In this case the time should be set manually every time when you're building the WDS.
As for the crash log I doubt that you can access any crach data regarding WDS failure.
Here's the WDS building guide if this may help you in some way.
- Copy Link
- Report Inappropriate Content
@terziyski Thanks for the suggestions. I am aware of the guide for WDS and my setup is in line with the instructions, which is why I want to look at the logs to see if there are any indications of what may be going on. The thing is that when the C9 crashes, time and date are reset to 2016 after having been set manually, and that all the logs get reset as well.
- Copy Link
- Report Inappropriate Content
I got your point, actually C9 behaves as if it has been restarted - logs are cleared and the system time needs to be set manually again.
- Copy Link
- Report Inappropriate Content
@terziyski This is normal for the C9? The reset on boot/crash?
- Copy Link
- Report Inappropriate Content
I wouldn't know that, but you have to consider that WDS is not a standard across different vendors:
- Copy Link
- Report Inappropriate Content
@terziyski Yes, the firmware is old and probably won't be any further. Given that I have the C9 solely to use as a bridge, which isn't working, I might flash it to DD WRT.
- Copy Link
- Report Inappropriate Content
This HW version is EoL and EoS (its latest FW release is as far as it can get) so you may try that if it works better for you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 490
Replies: 7
Voters 0
No one has voted for it yet.