@kogan 

there is no doubt that there is something that is not quite as it should be with your network, but now I wanted to test a little more here and I adopted an EAP653 here to labbing a little more, I don't have the opportunity to connect the access point with a cable so it meshes wirelessly.

my setup is like this.

the phone that I am testing with is connected with wifi6 and wpa3. now I have gone back and forth many times and it roams without problems every time as you can see here.

I use channel 112 80 Mhz bandwith av wirelss mesh, mybee there is some differences some plase. mybee you should try 80Mhz bandwith to se if there is any differences.

​

  @MR.S 

I stil use 160Mhz, but I'll try out 80MHz. With 160MHz I get full 1Gbps of the internet connection....

Hi @kogan 

Thanks for posting in our business forum.

kogan wrote

  @MR.S 

 

I stil use 160Mhz, but I'll try out 80MHz. With 160MHz I get full 1Gbps of the internet connection....

 What is your phone model and system version?

Is this resolved? Any update?

  @Clive_A 

Hi mate

it is not resolved, but working with wpa2.

hardware is:

Pixel 7 and pixel 7 pro, newest os, macbook air with ventura, surface with win11 and 2 huawei win11 notebooks....

  @Clive_A 

But now I have found another funny "bug".

Under services, I set up an automatic reboot every week in the night from sunday to monday. After reboot internet is limited to 100Mbit, although I have 1Gbit.

Last time, after second reboot of the ER706W full Gigabit connection was available. But I dont remeber, if I rebooted the er706w over omada or just took the powercord...

yesterday, monday, I wondered about slow download speed, the problem with limited 100Mbit was there again. I rebooted over Omada, but it stil had 100mbit.

Then I did, what I normally do on omada by my customers with similar problems: forced provisioning. After 5-10 minutes selfconfigurating, 1Gbit internet connection was available again.

Should I open new thread...? :-)

thanks

Hi @kogan 

Thanks for posting in our business forum.

kogan wrote

  @Clive_A 

 

But now I have found another funny "bug".

Under services, I set up an automatic reboot every week in the night from sunday to monday. After reboot internet is limited to 100Mbit, although I have 1Gbit.

Last time, after second reboot of the ER706W full Gigabit connection was available. But I dont remeber, if I rebooted the er706w over omada or just took the powercord...

 

yesterday, monday, I wondered about slow download speed, the problem with limited 100Mbit was there again. I rebooted over Omada, but it stil had 100mbit.

Then I did, what I normally do on omada by my customers with similar problems: forced provisioning. After 5-10 minutes selfconfigurating, 1Gbit internet connection was available again.

 

Should I open new thread...? :-)

 

thanks

You might replace the cable. Common to me and the only cause would be the cable.

If you disagree with this, let me know the cable length.

  @Clive_A

Its 1M pimf cat6a cable....

Hi @kogan 

Thanks for posting in our business forum.

kogan wrote

  @Clive_A

 

 

 

 

Its 1M pimf cat6a cable....

Where did this line go? Patch panel?

  @Clive_A 

maybe it wasnt seen that good, I took YELLOW now :-) only 1m, goes behind and comes down out to the cable router

Hi @kogan 

Thanks for posting in our business forum.

kogan wrote

  @Clive_A 

 

 

 

 

maybe it wasnt seen that good, I took YELLOW now :-) only 1m, goes behind and comes down out to the cable router

Yes, that was too dark. So I assume that Fujitsu is your cable router(modem), right?

So I will focus on the first issue reported. Roaming issue. There was a similar report on that but on two different models which do not fit yours, and on iPhone only.

This 100M after the reboot, I will, later on, check with the test and dev team and see if they have ever received any feedback or can reproduce in the lab.