How to configure the network with 2 BE800?

How to configure the network with 2 BE800?

How to configure the network with 2 BE800?
How to configure the network with 2 BE800?
2024-01-29 08:32:46 - last edited 2024-01-31 08:34:40

Hello,

 

I bought a BE800 router and configured it as the main router. I saw that the wifi signal is not strong enough all over my house so I bought another one. How should I configure the second one to acr just as an access point? (I don't want it to act as a mush system since I have a wired connection that I can connect to it).

 

Thanks,

Alex

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to configure the network with 2 BE800?-Solution
2024-01-29 09:49:28 - last edited 2024-01-31 08:34:40

  @Aburdo 

 

Here's how to configure a wireless router in AP mode (Case 1).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:How to configure the network with 2 BE800?-Solution
2024-01-29 09:49:28 - last edited 2024-01-31 08:34:40

  @Aburdo 

 

Here's how to configure a wireless router in AP mode (Case 1).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:How to configure the network with 2 BE800?
2024-07-02 03:00:46

  @Aburdo To set up your second BE800 router as an access point, first, connect it to your main router using an Ethernet cable. Then, log into the second router’s settings and disable its DHCP server to prevent IP conflicts. Change the second router’s IP address to a different one within the same range as your main router but outside its DHCP range. Lastly, set the same WiFi name (SSID) and password on the second router as the main router to ensure seamless connectivity throughout your house.

  1  
  1  
#3
Options