Port forward not working / Stopped working
Port forward not working / Stopped working
Tags:
#Port Forwarding
Model:
Archer MR600
Hardware Version: V2
Firmware Version: Firmware Version:1.3.0 0.9.1 v0001.0 Build 210208 Rel.61056n
Hi,
I have a problem with accessing cameras on a network in my summer house. I have used the MR600 for about 2 years and it has been working perfectly but now it suddenly stopped working and it's seemingly impossible to access any port despite having the port forward set up.
- I'm testing via https://www.yougetsignal.com/tools/open-ports/
- I'm on a swedish mobile network called Tele2.
- I've turned of the firewall for both ipv4 and ipv6 while trying.
Have anyone seen this happen or are experiencing the same issue?
1 Accepted Solution
Re:Port forward not working / Stopped working-Solution
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".
Re:Port forward not working / Stopped working-Solution
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".