tpPLC app findet keine Geräte

tpPLC app findet keine Geräte

tpPLC app findet keine Geräte
tpPLC app findet keine Geräte
2024-03-02 10:34:43 - last edited 2024-04-08 08:22:59

Hallo,

ich benutze verschiedene Tplink powerline adapter, sowie Devoloadapters. Inklusive Wlanadapter.

ich habe rpPLC app auf Ipad geladen. Leider kommt immer "no device found"

ich benutze auch Devolohome app, welche alles zeigt und sich managen lässt.

hat Jemand eine Idee?

 

Grüsse aus Schwaben

 

Never give up
  0      
  0      
#1
Options
1 Accepted Solution
Re:tpPLC app findet keine Geräte-Solution
2024-03-06 06:56:28 - last edited 2024-04-08 08:22:59

  @Lucalux 

 

If the Powerline devices are working perfectly but they are not coming up in the tpPLC App, you may try the following troubleshooting.

1. Ensure the client device installed tpPLC Utility or App and the powerline devices are working in the same network so that they could communicate with each other.

2. Connect your client device to the powerline unit directly via Ethernet cable or Wireless (unplug other powerline units)

3. Download and try the latest tpPLC Utility or App

4. Turn off VPN software or mobile data

5. Try a different client device.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:tpPLC app findet keine Geräte-Solution
2024-03-06 06:56:28 - last edited 2024-04-08 08:22:59

  @Lucalux 

 

If the Powerline devices are working perfectly but they are not coming up in the tpPLC App, you may try the following troubleshooting.

1. Ensure the client device installed tpPLC Utility or App and the powerline devices are working in the same network so that they could communicate with each other.

2. Connect your client device to the powerline unit directly via Ethernet cable or Wireless (unplug other powerline units)

3. Download and try the latest tpPLC Utility or App

4. Turn off VPN software or mobile data

5. Try a different client device.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:tpPLC app findet keine Geräte
2024-07-15 17:45:21

  @Sunshine 

 

hi, it is no different. Tpplc ap find no device, therefore i connect ipad with tp-wireless adapter.

it is only possible to connect a pc via lancable on one of tplink adapter. It is really sad, that tplink find a solution 

greetings

Never give up
  0  
  0  
#3
Options