Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network

Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network

Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network
Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network
2024-03-08 02:18:04 - last edited 2024-03-11 08:52:36
Model: Deco X68  
Hardware Version:
Firmware Version: 1.2.3 Build 20231226 Rel. 72923

Hi,

I'm on the Starhub 10Gbps network and recently I got the switch TL-SX105 to maximise the connection to my Deco X68 mesh.

The Starhub Nokia ONR to TL-SX105 works fine at 10Gbps as it shows left side 10Gbps green LED. When I connect my Deco X68 using the 2.5Gbps port to SX105, the LED shows amber on the right, which means it is only at 1Gbps connection. Cable use is a new CAT7 cable 1metre. 

Question is, why can't I get 2.5Gbps connection speed on X68 (should show right green LED instead on SX105)?

 

Thanks,

Thomas

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network-Solution
2024-03-08 12:42:06 - last edited 2024-03-11 08:52:36
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Deco X68 + Switch TL-SX105, not showing 2.5Gbps signal although on 10Gbps network-Solution
2024-03-08 12:42:06 - last edited 2024-03-11 08:52:36
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 206

Replies: 1

Related Articles