Forums

Stories

Knowledge Base

Business Community > Controllers > Fortigate 100E, OC200, EAP615-Wall no WAN port

< Controllers

Fortigate 100E, OC200, EAP615-Wall no WAN port

Taper

LV1

2024-03-12 15:45:38 - last edited 2024-03-13 06:50:46

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-01-04

Fortigate 100E, OC200, EAP615-Wall no WAN port

2024-03-12 15:45:38 - last edited 2024-03-13 06:50:46

Tags: #Controller Installation #VLAN & Multi-Networks

Model: OC200 EAP615-Wall

Hardware Version: V5

Firmware Version: 5.13.24

Hi
Please let me know if in this configuration - if I don't have an OMADA router, will I run WiFi managed by OC200?
When creating a LAN subnet, I don't have a WAN port to choose from. My WAN router is Fortigate and I have an unconfigured Internet provider in the OC200 controller. I turned on WiFi, but I have no Internet on subnets, the Internet works on the main WiFi network.
In Fortigate I have the address 192.168.0.1 and I would like to have it on Omada. The subnets are 192.168.10.1 etc.

Thank you for your help.
Regards

1 Accepted Solution

MR.S

LV5

2024-03-12 17:00:10 - last edited 2024-03-13 06:50:46

Posts: 1614

Helpful: 581

Solutions: 181

Stories: 0

Registered: 2018-08-17

Re:Fortigate 100E, OC200, EAP615-Wall no WAN port-Solution

2024-03-12 17:00:10 - last edited 2024-03-13 06:50:46

@Taper

The LAN or WAN settings will have no meaning when you have a fortigate router. they only work if you have an omada router.
you can creat vlan on omada switches but then you select vlan only in omada LAN config.

all settings that have to do with the internet or lan are done on the fortigate router.

on the wifi ssid, select vlan if you have tagged any ports on the fortigate router, untagged ports leave the vlan settings unchanged, so do not enter vlan1 on the ssid if this is untagged

Recommended Solution

1 Reply

MR.S

LV5

2024-03-12 17:00:10 - last edited 2024-03-13 06:50:46

Posts: 1614

Helpful: 581

Solutions: 181

Stories: 0

Registered: 2018-08-17

Re:Fortigate 100E, OC200, EAP615-Wall no WAN port-Solution

2024-03-12 17:00:10 - last edited 2024-03-13 06:50:46

@Taper

all settings that have to do with the internet or lan are done on the fortigate router.

on the wifi ssid, select vlan if you have tagged any ports on the fortigate router, untagged ports leave the vlan settings unchanged, so do not enter vlan1 on the ssid if this is untagged

Information

Helpful: 0

Replies: 1

Fortigate 100E, OC200, EAP615-Wall no WAN port

Fortigate 100E, OC200, EAP615-Wall no WAN port

Information

Voters 0

Tags