Archer AX23 to Deco M5 LAN Speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX23 to Deco M5 LAN Speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX23 to Deco M5 LAN Speed
Archer AX23 to Deco M5 LAN Speed
2024-03-19 03:08:22
Tags: #Access Point Mode #Speedtest
Model: Archer AX23  
Hardware Version:
Firmware Version:

Hi,

 

Im using AX23 as Main router and Deco M5 as an access point.

Both LAN port remark as gigabit port, but when running a speed test, it show up 90mbps++ only, likely limit below 100mbps.

(Using a 5G configured SSID to run the speed test)

 

Got any options to configure on this?

  0      
  0      
#1
Options
3 Reply
Re:Archer AX23 to Deco M5 LAN Speed
2024-03-19 04:20:13

  @CloudZero 

 

You can check your AX23 ethernet port negotiated speed here:

 

 

If it's not 1000mbps, change the cable between AX23 and Deco M5 and check if there's any difference.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Archer AX23 to Deco M5 LAN Speed
2024-03-19 15:42:31

  @terziyski Thank you 

Seems like detect 100mbps only

will try change the LAN cable from cat5e to cat6 see this issue solve or not later.

  0  
  0  
#3
Options
Re:Archer AX23 to Deco M5 LAN Speed
2024-03-19 15:44:16

  @CloudZero 

 

That's usually a cable issue - CAT5e would suffice but sometimes it depends on the cable quality.

Changing the cable would be the best approach for this type of issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options