Ausfall Powerline LED an allen Geräten
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hallo in die Runde,
wir haben heute den Ausfall aller Powerline LED an den obigen Kits zu beklagen.
Zunächst Ausfall der Powerline LED des Erweiterungskit PA8030
Der Hauptadapter AV1200 zeigte zu dem Zeitpunkt eine Wechsel von grün rot orange an.
Nachdem dieser auch einmal ausgeschaltet worden ist zeigt dieser auch kein Powerline mehr an.
Es ist auch keiner der Geräte mehr zu pairen.
Auch nicht in anderen Räumen mit nebeneinander liegenden Steckdosen. Die Powerline LED bleibt aus.
Ein Reset auf Werkseinstellungen zeigt keine Wirkung
Was können wir noch tun ?
Georg
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, in order to establish a stable powerline connection, all powerline adapter/extenders must be connected to the same electrical circuit.
Please make sure there is no air switch or surge protector between powerline adapters, avoid connecting powerline adapters/extenders into power strips or extension boards.
You may follow the next steps to pair them again:
1) Connect the first powerline adapter into a wall socket, connect the powerline adapter to your Router's LAN by Ethernet cable. Connect the other powerline device into another wall socket nearby.
2) If powerline lights are off on both uinits, you have to manually pair them. There is be a "pair" button on each powerline device, press the pair button on each of them for 1 second, and wait until the "Home/Powerline" light on them become solid on (blinking means pairing).
3) If you have more than two powerline adapters, repeat step 1-2 to add them into the existing network.
4) When all powerline devices are paired, you may relocate the powerline extenders to other places.
- Copy Link
- Report Inappropriate Content
Hi, in order to establish a stable powerline connection, all powerline adapter/extenders must be connected to the same electrical circuit.
Please make sure there is no air switch or surge protector between powerline adapters, avoid connecting powerline adapters/extenders into power strips or extension boards.
You may follow the next steps to pair them again:
1) Connect the first powerline adapter into a wall socket, connect the powerline adapter to your Router's LAN by Ethernet cable. Connect the other powerline device into another wall socket nearby.
2) If powerline lights are off on both uinits, you have to manually pair them. There is be a "pair" button on each powerline device, press the pair button on each of them for 1 second, and wait until the "Home/Powerline" light on them become solid on (blinking means pairing).
3) If you have more than two powerline adapters, repeat step 1-2 to add them into the existing network.
4) When all powerline devices are paired, you may relocate the powerline extenders to other places.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 356
Replies: 3
Voters 0
No one has voted for it yet.