Switch router between repeater & emitor mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Switch router between repeater & emitor mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
14 Reply
Re:Switch router between repeater & emitor mode-Solution
2024-04-07 22:53:20 - last edited 2024-04-08 03:09:28

  @PierreTdC 

 

Of course there's a difference between two routers in Easymesh and two routers (main router and and router in AP mode).

In first case the SSID is the same for the two devices and they emitting one wireless network - that's the purpose of a mesh network.

In second case every router emits a different wireless network (even with the same SSID).

If both routers are in Easymesh the only way to use AX58 for a main router is to reset to factory defaults and configure as such.

If you want to join AX58 back to Easymesh of AX55 you have to reset AX58 to factory defaults and add to the AX55 Easymesh.

 

Setting AX58 in AP mode is quite different than setting AX58 in Easymesh. I alredy posted AP mode configuration guide.

Here's how to add AX58 in Easymesh to AX55.

Here's a guide for building Easymesh with an ethernet backhaul (if you use ethernet connection between AX55 and AX58).

Note: To use AX58 in an ethernet backhaul Easymesh it has to be HW v2 - you can check that on its bottom sticker.

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#12
Options
Re:Switch router between repeater & emitor mode
2024-04-07 23:53:25

  @terziyski 

 

Ok thanks, that's clarifies a  lot.

 

Would the wifi extension from Ax55 work as well with Ax58 in AP mode as in Easymesh satellite mode (which is also a form of AP mode ASI understand)?

 

 

  0  
  0  
#13
Options
Re:Switch router between repeater & emitor mode
2024-04-08 00:03:07 - last edited 2024-04-08 00:08:37

  @PierreTdC 

 

Yes, it will work as well when AX58 is in AP mode.

The difference is the seamless roaming of your wireless client devices which Easymesh offers.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#14
Options
Re:Switch router between repeater & emitor mode
2024-04-08 00:08:34

  @terziyski 

 

Ok thanks will test it

  0  
  0  
#15
Options