Home Network Community > Wi-Fi Routers > AP Mode good but no Internet
< Wi-Fi Routers

AP Mode good but no Internet

AP Mode good but no Internet

AP Mode good but no Internet
AP Mode good but no Internet
2024-06-02 12:38:07
Tags: #Access Point Mode
Model: TL-WR840N  
Hardware Version: V6
Firmware Version: 0.9.1 4.19 v0001.0 Build 231120 Rel.85982n

I'm using a TP Link router to be a extender now I have already set it up, I connected a ethernet cable plugged in LAN on my main router and on WAN on thr TP Link TL-WR840N Router then set it up on the website (tplinkwifi.net). I did the quick set up then the internet logo on the TP Link device turned solid but no Internet, Why is that??

  0      
 
  0      
 
#1
Options
5 Reply
Re:AP Mode good but no Internet
2024-06-02 14:16:17

  @BunzZz 

 

Here's the guide for configuring a router in AP mode (Case 1).

It's mandatory that the LAN IP address of the device in AP mode to be in the same subnet as the main router. i.e:

If the main router has a LAN IP address 192.168.1.0/24, the LAN IP address of AP should be in the same subnet.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:AP Mode good but no Internet
2024-06-02 17:16:39

  @terziyski I've already done that set up, I finished the quick set up but there's still no internet connection.

  0  
  0  
#3
Options
Re:AP Mode good but no Internet
2024-06-02 20:45:03

  @BunzZz 

 

What's your main router LAN IP address and what's the WR840n LAN IP address ?

In general these LAN settings should work out of the box.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:AP Mode good but no Internet
2024-06-05 12:37:34

  @terziyski Do I need to set them both like the main is 192.168.23.18 then what should I put in the TP Link?

  0  
  0  
#5
Options
Re:AP Mode good but no Internet
2024-06-05 12:59:03

  @BunzZz 

 

If your main router is with a LAN IP address 192.168.23.18 then set TP-Link with a LAN IP address 192.168.23.254 and test.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 492

Replies: 5

Tags

Access Point Mode
Related Articles
Problem with AP mode
553 0
No internet in AP mode
976 2
AX55 not working in AP mode
171 0
AX 10 AP mode is not working
725 0
IPv6 not working on AP Mode
1504 0
Deco M5 no internet on AP mode
1410 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.