Hello,

    I have managed to set up an OpenVPN connection, but now I need to forward a port to a connected device. OpenVPN settings allow me to set IP addresses of only 10. .... Although my main net is 192.168... so far so good; everything works. But I need to be able to access the connected device from the outside. Therefore, I wanted to create Virtual Server port forwarding. It works for all other devices, but it is forbidden to create forwarding to 10.8. (The IP address and LAN IP address should be in the same subnet) ... how should I do it?! It would work with PPTP, but we all know we shouldn't. I have no problem accessing from 192.168... to 10.8. ... and vice versa; just the router firmware disables the forwarding between those two IP ranges.

   I also hope you understand how annoying it is not to be able to copy any of the error messages from the environment. Of course, there is no problem to click "Inspect" and copy it from developer tools in the browser, but your way to prevent text selection in the administration interface is more amateur and annoying than ineficient.

Thank you

Olda