Android phone can't connect to IKEv2
Hi, I'm trying to setup with a Pixel 7 (Android 14).
Tried multiple solutions from other posts but it doesn't seem to work, OpenVPN works though. Any ideas of what I'm doing wrong?
This is my configuration:
Here is what I have on my phone:
When trying to connect, it shows "unsuccessful"
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
iamjulianacosta wrote
@Clive_A could you please point to me what I'm doing wrong on the phone? I'm comparing and it looks like it's the same, using PSK, with 123 as identifier and the shared key is fine
If you use identifier, you should configure the Local ID. Isn't it? Server's local ID = cellphone identifier.
How to Configure IPsec IKEv2 VPN for Android 13/14 or iPhone
- Copy Link
- Report Inappropriate Content
Different phones may use different proposals. Try choosing more proposals.
Some of the phones do not support IP as Remote ID Type. You need to choose ID/Name instead.
We have a guide but it may not suitable for all phones:
How to connect to Omada Router using IKEv2 VPN of Android/iOS
For me, the OpenVPN is a better choice.
iamjulianacosta wrote
Hi, I'm trying to setup with a Pixel 7 (Android 14).
Tried multiple solutions from other posts but it doesn't seem to work, OpenVPN works though. Any ideas of what I'm doing wrong?
This is my configuration:
Here is what I have on my phone:
When trying to connect, it shows "unsuccessful"
- Copy Link
- Report Inappropriate Content
You have configured it wrong on the phone. Please refer to our guide carefully.
- Copy Link
- Report Inappropriate Content
@Clive_A could you please point to me what I'm doing wrong on the phone? I'm comparing and it looks like it's the same, using PSK, with 123 as identifier and the shared key is fine
- Copy Link
- Report Inappropriate Content
@Fae I tried both IP and ID but neither worked.
On the other hand, is there a way to add multiple proposals? The guide shows that I can add multiple, but when trying from controller, it doesn't seem to work
- Copy Link
- Report Inappropriate Content
iamjulianacosta wrote
@Clive_A could you please point to me what I'm doing wrong on the phone? I'm comparing and it looks like it's the same, using PSK, with 123 as identifier and the shared key is fine
If you use identifier, you should configure the Local ID. Isn't it? Server's local ID = cellphone identifier.
How to Configure IPsec IKEv2 VPN for Android 13/14 or iPhone
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 433
Replies: 5
Voters 0
No one has voted for it yet.