I'd like SSH in to my TP-Link Omada router and use the full CLI. But when I ssh in using the master administrator account, I can only get the limited CLI commands. (see below)

Googling around has turned up two results:
1. When the switch is managed by Omada SDN Controller, you only get the limited CLI. The full CLI via SSH isn't available.
(...which, on this switch, is running locally ON the switch)
2. You can't turn off the Omada SDN Controller instance that is running on the switch itself.

So how do I get the full CLI through SSH on the ER7217PC?  Can I somehow "unadopt" the switch from its own internal controller?

If it's not possible, can I file an enhancement request or bug report?

Here's what I'm running:
ER7212PC v1.0, with integrated SDN Controller
Controller version 5.8.38
Firmware Version 1.1.4 Build 20240423 Rel.85682

Client is Windows 10 x64 running PuTTY x64 v. 0.81

Here's what I can get from the CLI, the standard limited ( = useless) commands
>
  help                                                 Show available commands
  exit                                                 Exit from current mode
  enable                                               Turn on privileged commands
  disable                                              Turn off privileged commands
>enable
#help
Commands available:
  help                                                 Show available commands
  exit                                                 Exit from current mode
  enable                                               Turn on privileged commands
  disable                                              Turn off privileged commands
  configure                                            Enter configuration mode

#configure
(config)#help
Commands available:
  help                                                 Show available commands
  exit                                                 Exit from current mode

Regards,
Thomas Potter
Cambridge, MA  USA