Omada Routing Possible Bug - 5.14.26.23
Omada Routing Possible Bug - 5.14.26.23
Hi Everyone,
Got a puzzling one for you and need some help!
I have the following:
1 x ER605 Router
1 x OC200 Controller
1 X SG2428P Switch ( 28 Port Gigabit POE+)
Interfaces Configured:
Interface 1 (Default) - Device Management (192.168.0.0/24)
Interface 100 - Servers (192.168.1.0/24)
Interface 101 - DMZ Servers (192.168.2.0/24)
Interface 102 - Corporate (192.168.3.1/24)
Interface 103 - Guest Wireless (192.168.4.1/24)
Interface 104 - IOT Devices (192.168.5.1/24)
Interface 105 - CCTV Devices (192.168.6.1/24)
Interface 106 - Printers (192.168.7.1/24)
Interface 107 - SSL VPN (192.168.8.1/24)
I have physically connected it all the devices together and adopted the Router and Switch successfully. My issue is when I create the Interfaces and have devices in each of them I am unable to ping or any other protocol between them - HOWEVER there is an ABNORMALITY coming :-) I can get a DHCP Address from my Domain Controller hosted in Interface 100 but cannot Ping, RDP etc into it or get into any other VLAN.
i went through and triple checked all settings, added in Switch and Gateway Rules as a test but they didn't work either.
When I do a tracert I can hit the interface IP but it will not go any further than that.
Hope someone can help!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ok an interesting development and i cannot understand the reasoning behind this so bear with me...
Apparently if i have an interface set on the Router, for example 192.168.1.1 on VLAN 101, i actually have to go to the Switch - Config - VLAN Interface - VLAN 101 and then set a Static IP Address and then do the DHCP Relay option. It then works fine!
Previously in the ohter versions i did not have to worry about this and DHCP Relay was working perfectly fine so i do still believe that something is wrong. Modelling on Cisco Packet Tracer the configuration works perfectly fine by having the ip helper-address set and pointing to an IP Address. There was no other / additional IP's needing to be set.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 822
Replies: 11
Voters 0
No one has voted for it yet.