Archer C54

Archer C54

Archer C54
Archer C54
2024-07-17 09:18:18 - last edited 2024-07-18 03:19:00
Model: Archer C54  
Hardware Version: V1
Firmware Version: 1.10.1 Build 210830 Rel.72210n(5553)

Hi experts. I just bought Archer C54 for my office. But after i configured QoS feature, feels like not work. Clients still consume maximum bandwidth, not what i set. It different than my MR3020 or WR840 which they have simple configuration and work as i config.

Please assist me if i'm wrong. Here picture of my config.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C54-Solution
2024-07-17 09:23:05 - last edited 2024-07-18 03:19:00

  @bengbenk 

 

QoS feature doesn't do the same as Bandwidth Limit. My advise - disable QoS as it won't work as you expected in your case.

Here's how the QoS should be configured.

If you're after speed limit pf devices connected to your router, this is not implemented in Archer C54. Archer C64 can do this - details.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Archer C54-Solution
2024-07-17 09:23:05 - last edited 2024-07-18 03:19:00

  @bengbenk 

 

QoS feature doesn't do the same as Bandwidth Limit. My advise - disable QoS as it won't work as you expected in your case.

Here's how the QoS should be configured.

If you're after speed limit pf devices connected to your router, this is not implemented in Archer C54. Archer C64 can do this - details.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Archer C54
2024-07-18 04:44:49

  @terziyski 

Thank you for answer. but i don't want set per device. i want only set globally for all clients, it means when i have 30 Mbps from provider, so i set only 20 Mbps in Archer C54. but as you said, maybe QoS feature in C54 is different than MR3020 or WR840. now i disable this feature which is not too disturbing my game and hope TP-Link can provide this feature in new firmware.

Thank you

  0  
  0  
#3
Options