AC750 Wifi cannot access admin after setting password

AC750 Wifi cannot access admin after setting password

AC750 Wifi cannot access admin after setting password
AC750 Wifi cannot access admin after setting password
2024-07-29 21:38:59
Model: TL-WR902AC  
Hardware Version: V4
Firmware Version:

I am trying to setup my AC750 stand alone - no internet. I can connect once, setup password and access admin.

Once I choose save, I cannot access 192.168.0.1 at all. I cannot even ping it.

Does the AC750 require an ethernet connection after setting an admin password to enter admin again????

  0      
  0      
#1
Options
2 Reply
Re:AC750 Wifi cannot access admin after setting password
2024-07-29 21:59:39

  @AC750HI 

 

Hi,

 

The behaviour of the TL-WR902AC depends a lot on the operation mode.

 

So you might want to tell us which one of the five modes you are trying to set up.

 

Depending on the situation you might have to access the admin webpage via 192.168.0.254.

 

  0  
  0  
#2
Options
Re:AC750 Wifi cannot access admin after setting password
2024-07-29 22:19:41

  @AC750HI 

 

Thank you!

 

I have determined IT DOES need an internet connection to do admin mode once the password has been set.

I don't know why it cannot resolve a local router address 192.168.0.1 without being connected to the internet.

My last TP-Link router was able to do this fine as well as all of my other routers.

  0  
  0  
#3
Options