Can't access devices connected to range extender from router wifi

Can't access devices connected to range extender from router wifi

Can't access devices connected to range extender from router wifi
Can't access devices connected to range extender from router wifi
2024-08-01 13:01:06 - last edited 2024-08-01 13:03:26
Model: RE605X  
Hardware Version: V2
Firmware Version: 1.0.3 Build 20230907 Rel. 38400(6985)

I have Archer VR600 v3, Firmware Version:1.6.0 0.9.1 v009e.0 Build 230809 Rel.6944n with a RE605X repeater connected to it with OneMesh, devices connected to the router wifi, cannot connect to devices connected to the repeater. I have DHCP disabled on the repeater and enabled on the router.

The repeater has static IP and I can't connect to the web interface when I am not in the same room.

 

For example, I have a Raspberry Pi with static IP on 192.168.1.120 with a webserver running, when it connects it can only be accessed on my phone only if I am in the same room, when I move to a different room, connection to that IP address fails.

Another issue I had is I was unable to connect to WhatsApp calls on my phone when connected to the repeater wifi.

 

There's another repeater TP-Link RE305 4.0 connected to the same mesh network and does not have these issues.

 


 

 

  0      
  0      
#1
Options
5 Reply
Re:Can't access devices connected to range extender from router wifi
2024-08-01 13:04:14

  0  
  0  
#3
Options
Re:Can't access devices connected to range extender from router wifi
2024-08-02 11:09:04

  @hus9000 

Hi,

 

Please try to ping the Raspberry Pi IP and also the router's LAN IP when you connect to the RE605X and provide the ping results.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Can't access devices connected to range extender from router wifi
2024-08-02 11:41:35

  @Sunshine 

Here you go, I added tracert just in case

 

PS C:\Users\Hus> ping 192.168.1.120

Pinging 192.168.1.120 with 32 bytes of data:
Reply from 192.168.1.120: bytes=32 time=2ms TTL=64
Reply from 192.168.1.120: bytes=32 time=4ms TTL=64
Reply from 192.168.1.120: bytes=32 time=1ms TTL=64
Reply from 192.168.1.120: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.1.120:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 4ms, Average = 2ms
PS C:\Users\Hus> tracert 192.168.1.120

Tracing route to 192.168.1.120 over a maximum of 30 hops

  1     1 ms     2 ms     1 ms  192.168.1.120

Trace complete.


PS C:\Users\Hus> ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=2ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2ms TTL=64

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 2ms, Maximum = 6ms, Average = 3ms

 

 

Pinging the router from inside the Pi:

 

klipper@mainsailos:~ $ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=3.52 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=3.20 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=3.08 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=2.49 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.86 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.89 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=1.83 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.23 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=3.31 ms
64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=2.75 ms
64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=2.82 ms
64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=2.51 ms
64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=3.28 ms
^C
--- 192.168.1.1 ping statistics ---
13 packets transmitted, 13 received, 0% packet loss, time 12016ms
rtt min/avg/max/mdev = 1.833/2.675/3.524/0.569 ms

 

klipper@mainsailos:~ $ traceroute 192.168.1.1
traceroute to 192.168.1.1 (192.168.1.1), 30 hops max, 60 byte packets
 1  192.168.1.1 (192.168.1.1)  5.984 ms  6.122 ms  6.391 ms

 

 

 

 

Pinging when my computer is not connected to the repeater, I also pinged it on the mDNS address just to check if it's reachable, but it wasn't:

 

PS C:\Users\Hus> ping 192.168.1.120

Pinging 192.168.1.120 with 32 bytes of data:
Reply from 192.168.1.101: Destination host unreachable.
Request timed out.
Reply from 192.168.1.101: Destination host unreachable.
Reply from 192.168.1.101: Destination host unreachable.

Ping statistics for 192.168.1.120:
    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
PS C:\Users\Hus> tracert 192.168.1.120

Tracing route to 192.168.1.120 over a maximum of 30 hops

  1     *     Hus-Asus [192.168.1.101]  reports: Destination host unreachable.

Trace complete.
PS C:\Users\Hus> ping mainsailos.local

Pinging mainsailos.local [fe80::32da:a4b6:a60c:aac3%18] with 32 bytes of data:
Destination host unreachable.
Destination host unreachable.
Destination host unreachable.
Destination host unreachable.

Ping statistics for fe80::32da:a4b6:a60c:aac3%18:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
PS C:\Users\Hus> tracert mainsailos.local

Tracing route to mainsailos.local [fe80::32da:a4b6:a60c:aac3%18]
over a maximum of 30 hops:

  1     *        *     Destination host unreachable.

Trace complete.
 
  0  
  0  
#5
Options
Re:Can't access devices connected to range extender from router wifi
2024-08-06 14:22:13

  @Sunshine Any updates on this?

  0  
  0  
#6
Options
Re:Can't access devices connected to range extender from router wifi
2024-08-17 17:51:37

Still having these issues

  0  
  0  
#7
Options