TL-PA2010PKIT Connectiong problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-PA2010PKIT Connectiong problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-PA2010PKIT Connectiong problems
TL-PA2010PKIT Connectiong problems
2013-08-16 04:16:16
Region : Portugal

Model : TL-PA2010PKIT

Hardware Version : V1

Firmware Version :

ISP :


I bought my Powerline Adapters about 1 month ago.

It worked fine until a week ago. The adapter i have in my bedroom disconnects everyday after a few hours of usage, making me have to unplug the adapter and connect the adapter near the main adapter (connected to the main Router) in order to resync both adapters inorder to be able to use internet on my bedroom.

Sometimes resyncing does not work and i have no idea why.

As this ever happened to anyone else? Is there a way to fix it?
  0      
  0      
#1
Options
7 Reply
Re:TL-PA2010PKIT Connectiong problems
2013-08-18 15:47:10
How about reset them by using the CD software utility and then give a try. If still the problem, i think you can try to disable the power save function by this tool: http://www.tp-link.com/en/support/download/?model=TL-PA511&version=V1#tbl_b
  0  
  0  
#2
Options
Re:TL-PA2010PKIT Connectiong problems
2013-08-18 20:12:30
None of those work. It keeps disconnecting.
  0  
  0  
#3
Options
Re:TL-PA2010PKIT Connectiong problems
2013-08-22 16:29:15
If still disconnecting, it may be the hardware problem. My suggestion is that you can get them replaced.
  0  
  0  
#4
Options
Re:TL-PA2010PKIT Connectiong problems
2014-01-12 19:28:25
Same problem here.
  0  
  0  
#5
Options
Re:TL-PA2010PKIT Connectiong problems
2014-01-14 15:26:22
Are there any high-power electrical appliance switched ON or OFF the moment disconnection happening ??
  0  
  0  
#6
Options
Re:TL-PA2010PKIT Connectiong problems
2014-02-17 17:19:52
I've fixed my problems after upgrading firmware and deactivating the powersave feature with this tool: http://www.tp-link.com/en/support/download/?model=TL-PA511&version=V1#tbl_b

FYI
  0  
  0  
#7
Options
Same Problem
2014-02-20 19:38:28
Hello Olea. I have the same problem. Could you tell me the link of the firmware you have used to upgrade your PLCs?

Thank you!
  0  
  0  
#8
Options