How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
-Lan cables are working properly.
-Ip camera got 12V power.
-Both routers are working.
-ADSL wi-fi router is in 'bridge mode' and DHCP is off.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Could you perhaps post a screenshot of the settings menu where you configure "bridge mode" on the ADSL Wi-Fi router?
I know some router manufacturers use the term "Bridge mode" to refer to what TP-Link calls "Access Point" mode.
However, on routers that come with a built-in modem (in your case an ADSL modem) the term "bridge mode" more commonly refers to disabling the "router" features of the device and having it work as a pure modem. If that was the case for your ADSL Wi-Fi router, then the network setup shown in your drawing would likely not work.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@woozle ip address of ip camera: 192.168.1.64 (factory settings)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Using this guide you should be able to use your ADSL router as access point and get this topology working.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 276
Replies: 7
Voters 0
No one has voted for it yet.