Archer NX200 aggregation (CA)
Dear users and technical specialists,
I would like to ask if this router - Archer NX200 - can aggregate (combine) 5G and 4G together... or it can work only in either 5G or 4G.
I need to know if this 5G router is able to combine these specific frequencies : 5G (N28) + 4G (B1, B3 and B20)
thank you in advance,
Jimmydix
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Thanks for posting on TP-Link Community.
Archer NX200 can combine 5G and 4G.
It may work to combine 5G (N28) + 4G (B1, B3 and B20) but it does not allow to control it manually. It also depends on the SIM provider.
- Copy Link
- Report Inappropriate Content
Dear Sunshine,
thank you very much for your confirmation. If this archer NX200 can really merge 5G and 4G together then I would be a happy customer.
Sim card that I will be using in the modem has speed limited to 150 Mbps (the limit is somewhat flexible so it can go +15% faster) so combining 5G (N28 gives me around 40-60Mbps) and 4G together (B1+B20 gives me 50-90 Mbps) would optimaly utilize the sim card´s tariff
Currently the BTS tower servicing my location has 5G (N28) and 4G in B1, B3 and B20 variant.
I guess my other question would be : How many frequencies can Archer nx200 combine together ? I found out it has 8 antennas 2x2 mimo (I dont know how many antennas are 5G and how many 4G) so it can combine 4 channels together?
Archer Nx200 has also externall antenna slots which I would use with external antenna - I also dont know if those externall antenna slots support low frequencies (in my case 700-2100)
I was testing my expensive Zyxel nr7101 there which I took for testing from another property and it was able to aggregate 3 frequencies: N28 + B1+B20. B3 signal was propably too weak so the modem choosed B20 instead.
Thank you for more clarification on this.
Jimmy
- Copy Link
- Report Inappropriate Content
I think NX200 utilising Mediatek T750, spec says LTE 5x and 5G 2x
- Copy Link
- Report Inappropriate Content
Hello @Sunshine,
can you also please confirm if the device is able to use the carrier aggregarion between different bands over 4G GSM net? I'd like to use it with a SIM that does not support 5G. I'm a very very happy user of Archer MR600...that is a Cat6 carrier aggregator (max 2 possible bands for CA). I'd not have asked here if this info there had been present in the Mr600 VS NX200 comparions chart:
Left: MR600 - Right NX200. Source: TP-Link Italy
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 509
Replies: 4
Voters 0
No one has voted for it yet.