Ac 1350 archer (59) US v4.6 firmware

Ac 1350 archer (59) US v4.6 firmware

Ac 1350 archer (59) US v4.6 firmware
Ac 1350 archer (59) US v4.6 firmware
2024-10-03 11:28:40 - last edited 3 weeks ago
Model: Archer C59  
Hardware Version: V4
Firmware Version: 4.6

Hey i need help

 

(bricked router) I have a problem, i'm on the 192.168.0.1 on the upgrade firmware website on the last part of the recovery procces for the router, i just need to be sure i have the correct firmware, if i search "ac1350 archer (c59) v4.6 firmware" i get a tp link website and theres only available v4.8 and v4 v3 v2 v1 but not v4.6 so i clicked v4 and when i click on install it says something about getting firmware from the local website (Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.)  so i click on go to that website and then i just get v1 and v2 firmware. i don't know what to do now if i have to use v4 or v4.8 or if i have to use v1 or v2 from the "offcial website" that do not have the correct firmware or at least a v4 firmware.

  1      
  1      
#1
Options
1 Accepted Solution
Re:Ac 1350 archer (59) US v4.6 firmware-Solution
2024-10-03 13:26:19 - last edited 3 weeks ago

  @Junfer19 

 

Did you read the disclaimer on the firmware page carefully:

IMPORTANT:  Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)

 

That means the FW file in your case is the same for HW v4, v4.6 and v4.8.

If you insist to download HW v4.6 firmware, it is available on the Argentinian support portal - here but it's a pretty old version.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Ac 1350 archer (59) US v4.6 firmware-Solution
2024-10-03 13:26:19 - last edited 3 weeks ago

  @Junfer19 

 

Did you read the disclaimer on the firmware page carefully:

IMPORTANT:  Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)

 

That means the FW file in your case is the same for HW v4, v4.6 and v4.8.

If you insist to download HW v4.6 firmware, it is available on the Argentinian support portal - here but it's a pretty old version.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options