adding external antenna to TP-Link M7200

adding external antenna to TP-Link M7200

adding external antenna to TP-Link M7200
adding external antenna to TP-Link M7200
2024-10-12 09:39:36 - last edited 2024-11-18 03:40:58
Tags: #Mobile Wi-Fi #Network Connectivity #external antenna @ mobile router
Model: M7200  
Hardware Version: V3
Firmware Version: 3.0.6 Build 220829 Rel.1015n

Good morning,

could anyone give me the directions to open the device and locate the internal antenna connections ?

I need to add an external high gain antenna because the house is located in a very bad position and putting the antenna on the roof should help on having reliabel connection, now really bad and unstable.

 

Thanks 

  0      
  0      
#1
Options
1 Accepted Solution
Re:adding external antenna to TP-Link M7200-Solution
2024-10-14 07:03:18 - last edited 2024-11-18 03:40:58

  @Andrea_Cm 

 

Hi, thanks for posting question here.

Sorry we have no suggestions for adding external antennas and it is not suggested to do so.

If the network is unstable, you may put the same SIM card into your phone to check or contact local support for possible advice.

 

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:adding external antenna to TP-Link M7200-Solution
2024-10-14 07:03:18 - last edited 2024-11-18 03:40:58

  @Andrea_Cm 

 

Hi, thanks for posting question here.

Sorry we have no suggestions for adding external antennas and it is not suggested to do so.

If the network is unstable, you may put the same SIM card into your phone to check or contact local support for possible advice.

 

Recommended Solution
  0  
  0  
#2
Options
Re:adding external antenna to TP-Link M7200
2024-10-14 12:10:32

  @Marvin_S 

 

Ok MArvin, Thank you. I understand

Alternatively, can you provide to me the schematics diagram of the PCB board with information on where they are positioned the antenna connection pins ?

 

Best regards,

Andrea 

  0  
  0  
#3
Options
Re:adding external antenna to TP-Link M7200
2024-10-16 08:31:09

  @Andrea_Cm 

 

Hi, sorry, we can not access the information you asked~

  0  
  0  
#4
Options