Home Network Community > Wi-Fi Routers > Manage My repeater from main network
< Wi-Fi Routers

Manage My repeater from main network

Manage My repeater from main network

Manage My repeater from main network
Manage My repeater from main network
2024-10-15 04:12:13 - last edited 2024-11-18 01:19:31
Tags: #Remote Management #Access Point Mode
Model: Archer C7  
Hardware Version: V5
Firmware Version:

Hello Team, 

I have 2 Archer C7 version 5, the first (Alpha 192.168.68.1) one is the main Access point (Wired Connection from ISP Router), and the second (Beta) is configured as a repeater (connected to Alpha) so Beta have his IP address given from Alpha (192.168.68.50), 

When I connect a computer or cellphone to Beta I get another IP address (192.168.1.X) and I can manage Beta using his 192.16868.50 IP address or 192.168.1.1 but when I'm using a device connected to Alpha I can't manage Beta at All, I can ping it but can't access to Gui, 

 

Is there anything that I can do please ? 

thanks in advance 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Manage My repeater from main network-Solution
2024-10-15 10:06:31 - last edited 2024-11-18 01:19:31

  @Kaya_s 

Hi,

 

Is the beta router work in router mode?

If so, then the situation you describe is normal, because the beta router also has NAT function.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Manage My repeater from main network-Solution
2024-10-15 10:31:03 - last edited 2024-11-18 01:19:35

  @Kaya_s You need to set Beta router to Access Point Mode

or allow Remote Management in its interface

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Manage My repeater from main network-Solution
2024-10-15 10:06:31 - last edited 2024-11-18 01:19:31

  @Kaya_s 

Hi,

 

Is the beta router work in router mode?

If so, then the situation you describe is normal, because the beta router also has NAT function.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Manage My repeater from main network-Solution
2024-10-15 10:31:03 - last edited 2024-11-18 01:19:35

  @Kaya_s You need to set Beta router to Access Point Mode

or allow Remote Management in its interface

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 176

Replies: 2

Tags

Remote Management Access Point Mode
Related Articles
Remote Management (Access and manage the router over the internet)
233 2
Can you manage more than one network on the one app?
1625 0
 Manage Guest Network
229 0
Wired range extending causes main/host network to severely slow down
478 0
Extender not connecting to main network
740 0
 Repeater configured but the main router crashed
881 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.