I accidentally used a non tplink power adapter (help)

I accidentally used a non tplink power adapter (help)

I accidentally used a non tplink power adapter (help)
I accidentally used a non tplink power adapter (help)
2024-10-24 09:26:11 - last edited 2024-11-07 06:05:27
Tags: #Adapter
Model: TL-MR105  
Hardware Version: V1
Firmware Version: 1.6.0.0.9.1

Hello, my tp link mr105 modem has a power adapter came along with the box rated as 9v and .85amps.

 

however, I accidentally used the power adapter of my other modem which is rated 12v and 1amps.

 

will my modem break? i used the incorrect adapter for about 30 minutes.

 

i immediately unplug it the moment i realize it.

 

I am now currently using the correct adapter, so far i has not noticed any unusual behavior, do i need to worry?

  0      
  0      
#1
Options
1 Accepted Solution
Re:I accidentally used a non tplink power adapter (help)-Solution
2024-10-26 03:16:21 - last edited 2024-11-07 06:05:27

  @Averaham1511 

Hi,

Thanks for posting on TP-Link Community.

 

Using an unsuitable power supply for an extended period can potentially damage the router.

However, since you have switched back to the original power adapter, you can continue to use it normally without too much worry.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:I accidentally used a non tplink power adapter (help)-Solution
2024-10-26 03:16:21 - last edited 2024-11-07 06:05:27

  @Averaham1511 

Hi,

Thanks for posting on TP-Link Community.

 

Using an unsuitable power supply for an extended period can potentially damage the router.

However, since you have switched back to the original power adapter, you can continue to use it normally without too much worry.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:I accidentally used a non tplink power adapter (help)
2024-10-29 13:49:57
thanks, it is just a couple of minutes and till now i think there is no reason to worry as I still use it without any problem.
  0  
  0  
#3
Options