Wireguard - under the covers
I'm trying to understand how the SDN (OC200 Firmware Version = v2.16.3 Build 20240620 Rel.81038 and SDN v5.14.26.23) configures Wireguard.
I am interested to see if Masquerading is turned 'on' or 'off' and if it is possible to switch this setting?
I am assuming MSS Clamping is 'off' and that possibly there is a 'hidden' firewall zone for wireguard that dictates input, output and forward settings.
Regards,
Mike
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Clive_A Hi Clive,
I've now set my Wireguard Peer allowed IP's to:
0.0.0.0/1
128.0.0.0/1
::/1
8000::/1
Many thanks for your guidance.
Mike
- Copy Link
- Report Inappropriate Content
Hi @mortimm
Thanks for posting in our business forum.
It depends on how you configure your routing in peer settings.
Masking Your IP Address: Setting Up a Full Tunnel VPN Connection (PPTP/L2TP/OpenVPN/WireGuard)
We encourage you to search and use the label and tag to find out the existing guides we have.
- Copy Link
- Report Inappropriate Content
@Clive_A Hi Clive,
I've now set my Wireguard Peer allowed IP's to:
0.0.0.0/1
128.0.0.0/1
::/1
8000::/1
Many thanks for your guidance.
Mike
- Copy Link
- Report Inappropriate Content
Hi @mortimm
Thanks for posting in our business forum.
mortimm wrote
@Clive_A Hi Clive,
I've now set my Wireguard Peer allowed IP's to:
0.0.0.0/1
128.0.0.0/1
::/1
8000::/1
Many thanks for your guidance.
Mike
As we don't support v6 yet, setting v6 addresses here does not hurt a thing. But if you run into trouble when you access IPv6, remove them.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 172
Replies: 3
Voters 0
No one has voted for it yet.