Acrher C80 Router - WIFi Calling problem

Acrher C80 Router - WIFi Calling problem

Acrher C80 Router - WIFi Calling problem
Acrher C80 Router - WIFi Calling problem
3 weeks ago - last edited 8 hours ago
Tags: #WiFi Calling
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.15 Build 240812 Rel.53972n(4555)

Hello.

Archer C80 router Has anyone encountered the problem that "WiFi Calling" does not work for some reason, I would love to hear ideas or experience from anyone who has encountered the same problem.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Acrher C80 Router - WIFi Calling problem-Solution
3 weeks ago - last edited 8 hours ago

Hi  @Roni-T ,

If your phone are facing issues with Wi-Fi calling when connecting to TP-Link Archer Router, please follow the steps below:
    1) Verify that your ISP (Internet Service Provider) offers Wi-Fi calling service and ensure that the Wi-Fi calling option is enabled in your phone's settings.
    2) Disable SIP ALG. Please login the router's web management interface, go to Advanced > NAT Forwarding > ALG, disable the "SIP ALG" and save the settings.
    3) Reserve the IP address for your phone and Enable port forwarding for UDP port 500 and port 4500. Go to Advanced > Network > DHCP Server > add an address reservation entry in Address Reservation section. Go to Advanced > NAT Forwarding > Port Forwarding to configure port forwarding.
    4) For further detailed troubleshooting, please refer to this FAQ:  If Wi-Fi calling cannot work through TP-Link wireless router.

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Acrher C80 Router - WIFi Calling problem-Solution
3 weeks ago - last edited 8 hours ago

Hi  @Roni-T ,

If your phone are facing issues with Wi-Fi calling when connecting to TP-Link Archer Router, please follow the steps below:
    1) Verify that your ISP (Internet Service Provider) offers Wi-Fi calling service and ensure that the Wi-Fi calling option is enabled in your phone's settings.
    2) Disable SIP ALG. Please login the router's web management interface, go to Advanced > NAT Forwarding > ALG, disable the "SIP ALG" and save the settings.
    3) Reserve the IP address for your phone and Enable port forwarding for UDP port 500 and port 4500. Go to Advanced > Network > DHCP Server > add an address reservation entry in Address Reservation section. Go to Advanced > NAT Forwarding > Port Forwarding to configure port forwarding.
    4) For further detailed troubleshooting, please refer to this FAQ:  If Wi-Fi calling cannot work through TP-Link wireless router.

Recommended Solution
  1  
  1  
#2
Options