Home

Forums

Stories

Knowledge Base

Home Network CommunityWi-Fi Routers AX5400

Wi-Fi Routers

AX5400

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX5400

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX5400

Swampy66

2024-11-28 19:05:09 - last edited 2024-12-11 10:03:32

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-28

AX5400

2024-11-28 19:05:09 - last edited 2024-12-11 10:03:32

Tags: #Address Reservation

Model: Archer AX72

Hardware Version: V1

Firmware Version: 1.2.6 Build 20240619 rel.72016(4555)

According to http://tplinkwifi.net I have "AX5400 Wi-Fi 6 Router"

Firmware Version:

1.2.6 Build 20240619 rel.72016(4555)

Hardware Version:

Archer AX72 v1.0

CHECK FOR UPDATES

Firmware is up to date.

Apparently there is a limit of 64 DHCP IP reservations (I only need 20). When I try to add reservations the "Address Reservation" doesn't show additions beyond 7 items and incorrect data for exiting reservations. Is this an issue with the web interface? Is there a solution other than running my own DHCP server?

Help appreciated.

1 Accepted Solution

Joseph-TP

2024-11-29 09:51:18 - last edited 2024-12-11 10:03:32

Posts: 6511

Helpful: 474

Solutions: 2515

Stories: 0

Registered: 2024-06-22

Re:AX5400-Solution

2024-11-29 09:51:18 - last edited 2024-12-11 10:03:32

Hi @Swampy66

Please try the following suggestions:

1. Re-enter the information:

Double-check and re-enter the address information to make sure there are no spelling errors.

2. Refer to the configuration guide:

Consult the steps to confirm the address reservation:

3. Adjust the DHCP settings:

Log in to the router's management interface, check the DHCP settings, and make sure the address pool is configured correctly.

4. Use a different IP address:

Try to reserve a different IP address and make sure it does not conflict with an existing device.

5. Restart the device:

Sometimes restarting the router or related equipment can solve temporary problems.

If the issue persists, please take screenshots with error message and settings of Address reservation. Please let me know what are models of clients which devices cannot be set to address normally?

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.

Recommended Solution

1 Reply

Joseph-TP

2024-11-29 09:51:18 - last edited 2024-12-11 10:03:32

Posts: 6511

Helpful: 474

Solutions: 2515

Stories: 0

Registered: 2024-06-22

Re:AX5400-Solution

2024-11-29 09:51:18 - last edited 2024-12-11 10:03:32

Hi @Swampy66

Please try the following suggestions:

1. Re-enter the information:

Double-check and re-enter the address information to make sure there are no spelling errors.

2. Refer to the configuration guide:

Consult the steps to confirm the address reservation:

3. Adjust the DHCP settings:

Log in to the router's management interface, check the DHCP settings, and make sure the address pool is configured correctly.

4. Use a different IP address:

Try to reserve a different IP address and make sure it does not conflict with an existing device.

5. Restart the device:

Sometimes restarting the router or related equipment can solve temporary problems.

If the issue persists, please take screenshots with error message and settings of Address reservation. Please let me know what are models of clients which devices cannot be set to address normally?

AX5400

AX5400

Information

Voters 0

Tags